User Manual

Installation Instructions

237,21$/³'5$,1.,7,167$//$7,21

Dry Air 25 Series models are designed to improve dehumidification by 25%. Since more moisture will be removed from the

air, there is a greater possibility that water will drip from the wall case than with a standard unit. To prevent this water

from dripping onto external building walls, we recommend the use of RAD10 Drain Kit.

External Drain

See the Installation Instructions

in the RAD10 kit.

Internal Drain

See the Installation Instructions in

the RAD10 kit.

Type “A” screw for metal case or

Type “B” screw for molded case

Square

drain holes

Square

drain holes

Neoprene sponge gasket

Steel mounting plate

1/2” O.D. drain tube

Neoprene sponge gasket

Steel mounting plate

Type “A” screw for metal case or

Type “B” screw for molded case

Alternate:

6” long, 1/2” O.D.

straight copper tube

(The drain is located under the cabinet,

location to be determined in the field.)