Specification Sheet

AZ65H12EBM
GE Zoneline
®
Heat Pump Unit with Makeup Air, 265 Volt
Specification Revised 2/17
FEATURES AND BENEFITS
Makeup air - Delivers 25-50 CFM of continuous makeup air
whenever the room is occupied
Energy efficiency - When paired with occupancy sensing
hardware, ventilation can be halted during vacancy
Dehumidification - Dehumidifies at a rate of 5-6 pints per
24 hours (based on CFM level)
Boost heat option - Provides supplemental resistance heat
in heat pump mode
Heat & Freeze Sentinels - Keeps the room from overheating
or freezing
Electronic temperature limiting - Prevents expensive over-
cooling or over-heating of the room
Electronic touch controls with LED display
May reduce the need for individually ducted rooftop systems
Because makeup air increases room BTU load requirements
and requires additional PTAC cooling or heating, the
building’s electrical needs may be impacted
Makeup air models are not recommended for installation
within two miles of coastal areas
It is strongly recommended to install makeup air with wall
thermostats
SMC base pan
Simplified structure - Easy to maintain and service