Manual

49-80819 11
Installation Preparation
INSTALLATION PREPARATION
INSTALLATION CLEARANCES
These vent hoods are designed to be installed onto
a wall or beneath a soffit or cabinet.
Ŷ ,QVWDOOWKHVHKRRGV0LQWR0D[DERYH
the cooking surface.
NOTE: Clearances may vary due to type of
cooking product and local codes. Check with
local inspectors to be sure standard is applicable.
In this installation the ductwork running from the top
of the hood will be concealed in the soffit or upper
cabinetry.
For this installation, a decorative duct cover is
available to conceal the ductwork running from the
top of the hood. Use of the duct cover requires
special consideration to the installation height
above the countertop.
OPTIONAL DUCT COVER
ACCESSORIES
Standard decorative duct covers are available in
6" and 12" heights. Duct covers may be stacked,
in various combinations, to conceal the ductwork
running from the top of the hood to the ceiling.
Ŷ %HIRUH\RXEHJLQ\RXVKRXOGGHWHUPLQHWKH
installation height of the hood and order the
correct size duct cover. The duct covers should
be ordered at the same time as the vent hood
and be on site before installation. Order the duct
cover corresponding to your model.
6” Duct Covers
Hood
Model
6” Duct
Cover Dimensions
CV48S UX48DC6J 6”H x 19-11/16”W x 11-7/8”D
12” Duct Covers
Hood
Model
12” Duct
Cover Dimensions
CV48S UX48DC12J 12”H x 19-11/16”W x 11-7/8”D
OPTIONAL SERVICE PART
RANGE HOOD UTENSIL HOLDER
A utensil rack part # WB02X25909 is available as a
service part for this hood.
Visit GEApplianceParts.com for more details.
Wall Mount Installation
30" MIN.
36" MAX.
SOFFIT
Soffit Installation
30" MIN.
36" MAX.
6" Duct Cover
12" Duct Cover
Standard Duct Covers