Manual

20 49-2000061 Rev. 2
Troubleshooting tips ... Before you schedule service
Save time and money! Review the charts on the following pages first and you may not need to schedule service.
TROUBLESHOOTING TIPS
Problem Possible Cause What To Do
Fan does not operate when
the switch is on
A fuse may be blown or a circuit
breaker tripped.
Replace fuse or reset circuit breaker.
The blower connector is loose
or not plugged into its mating
connector.
Disconnect power to the unit. Remove the filters and look
up at the blower. If the blower connector plug is loose or
you see the connector dangling, the installer failed to plug
it in securely. Although it is a blind connection, it is easy
to plug in. See the Installation Instructions in this manual
for the plug location and how to plug the connector in.
Fan fails to circulate air
or moves air slower than
normal
Excessively soiled filters. Remove the filters, clean if necessary and replace them.
If cleaning and replacing the filters does not correct the
problem, schedule service.
Sufficient makeup (replacement) air is required for
exhausting appliances to operate to rating. Check with
local building codes, which may require or strongly advise
the use of makeup air. Visit cafeappliances.com for
available makeup air solutions.