Brochure

© 2010 General Electric Company. All Rights Reserved. Specications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product names menti-
oned in this document may be trademarks or registered trademarks of their respective companies, which are not afliated with GE.
Technical Specifications
GEIT-40047EN (08/10)
www.gesensinginspection.com
Detector Specications
Flat Panel Type Amorphous Silicon
Scintillator Material CsI
Active Area (approx.) 410 x 410 mm (16 x 16 in)
Image Formate 2048 x 2048
Pixel Pitch 200µm
A/D Conversion 14 bits
Max. Frame Rate 7.5 fps or 3.0 fps
Interface Fiber Optic or Gigabit Ethernet
Dynamic Range 10,000:1
Dimensions 562 x 454 x 52.5mm
Weight 22 kg (49 lb)
Operating Temperature 10° to 35° C (50° to 95° F)
Operating Humidity 10-90% non-condensing
Power Supply
Voltage 100-240V, 50-60Hz
UT Output Connector 163 x 287 x 56 mm (6 x 11 x 2 in)
Weight 3 kg (7 lb)
Temperature Controller
Voltage 100-240V, 50-60Hz
Dimensions 220 x 286 x 382 mm (9 x 11 x 15 in)
Weight 8 kg (19 lb)
Al-6061
Ti-6Al4V
Inconel 718
Detector Characterization Charts
The detector characterization charts provided on the left
are completed in accordance to ASTM E2597-07 Standard
Practice for the Manufacturing Characterization of Digital
Detector Arrays. This standard allows for the direct
comparison of DDAs by ensuring data is collected and
reported in a consistent and specied manner. The standard
also enables guidance for the appropriate pairings of
detectors with applications.
Pixels are identied as bad per one or more of the seven
denitions described in the ASTM E2597-07 document.
The pixels marked as bad will be corrected through GE’s
software utilizing data collected from good neighborhood
pixels.