User's Manual
40 41
40 41
The ISO function allows you to set the camera sensor
sensitivity to light. To improve the performance in
darker environments, a higher ISO value is required.
On the other hand, a lower ISO value is needed when
in bright conditions. (The ISO setting is only available
when the camera is in the Manual mode).
To set the ISO value:
1. In manual shooting mode, touch the
button at
the bottom right of the screen and then page down.
The ISO button will appear on this page.
ISO
2. Press the icon to enter the ISO setup menu.
3. Select an ISO level on the screen,
Auto, 64, 100,
200, 400, 800, 1600, 800(HQ) and 1600(HQ).
4.
Touch the button to conī½rm the ISO setting.
Pictures taken with higher ISO levels will contain
more noise than lower ISO levels.
In environments of high temperature or poor
ambient illumination, using ISO800(HQ) and
ISO1600(HQ) will improve image quality. However,
the two settings will increase image noise when
used in normal shooting conditions. Therefore,
the two settings are only recommended for
environments where the signal is poor