User's Manual

48 4948 49
When Using Manual Stitching:
After the rst shot is taken, the semi-transparent image
of the rst shot will appear at the edge of the screen.
You can use this image to compose your picture before
you press the shutter button to nish manual stitching.
Image stitching will remain activated throughout
the shooting process until the camera runs out
of battery. Touch the button to have the
camera return to the standby screen without
saving. Touch the button to save the le and
return to the standby screen.
6. The camera will then stitch the pictures into a
panorama automatically.
7. Press the playback button to enter Playback mode
and review the panorama result.
For best results, the use of a tripod is recom-
mended.
When you have taken the rst image, be sure to
avoid moving the camera too fast as it may lead
to stitch failure.
If the camera is moved to the wrong direction
or the angle of movement has deviated, you will
see a warning message on screen. The camera
will save the captured image 2 seconds later and
stop the shooting mode by returning to the Auto
Stitching menu.
After taking the rst picture, the following modes
will not be accessible: Flash, Self-timer, Macro
and Exposure Compensation.
When the panorama mode is active, no picture
can be deleted during the three shot sequence,
and no focus adjustment is allowed.