Installation Guide
3. Open the junction Box cover. Make necessary supply
wiring connections to supplied power cords using
appropriate wire connectors.
Junction Box
Junction Box
4. Lift the luminaire up to the light housing. Assemble
luminaire and light housing using 4 pcs M4 screws
(provided).
Light Housing
Luminaire
Notes :
• This product must be installed in accordance with
applicable local, state, and national electrical codes
by a licensed person familiar with the construction
and operation of the product and hazards involved.
• This luminaire must adequately grounded for
protection against shock hazards and to assure
proper operation.
• Make sure all electrical power is turned o while
installing the xture.
• If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similar
qualied person in order to avoid a hazard.
• The structure of Installation of this lighting needs to
aord load of 16 pounds. To avoid Lamp fall.
• Lamps recommended installation height of 16 feet or
above.
PRODUCT DIMENSIONS
4
Surface Mount
9.84 in.
11.81 in.
BOTTOM VIEW
SIDE VIEW
5.75 in.