User Manual and Operating Guide

7-16
7.28: Internal Input Pulse Accumulation Unit Label Block (46373-46420).
• 4 registers, 8 bytes. These labels are used to describe the units a pulse represents. Units are
usually one word and are 8 characters or less.
Examples of Units: Gallons, BTUs, Liters, Wh, kWh, VAh, etc.
Value Relay
0 Internal Relay 1
1 Internal Relay 2
2 Internal Relay 3
3 Internal Relay 4
End of Interval Pulse
Width (milliseconds)Enable
Disable Pulse
Enable Pulse
Byte
4-126
5ms
10 ms
15 ms
20 ms
25ms - 635ms