Operating Guide

WattStation Wall Mount User Manual
8 GE Energy ©2011 GE Company All Right Reserved
Step 3: Install wall mount bracket to the wall. Use the provided template to locate
wall-mounting holes to ensure hole locations match the bracket. Distance from
floor to bottom of wall mount bracket should be 18” minimum for indoor use, 24”
minimum for outdoor use, and 38” maximum for all applications per NEC 625.39.
For ADA compliant installation, refer to ADA accessibility guidelines, section 4.2.
Make sure the bracket is aligned so that power wire will fit through the WattStation
enclosure holes (for back-entry wiring only).
Step 4: Remove the oval snap-fit ring to access the cover hardware. Take off front
cover and the deadfront shield.