Operating Guide

WattStation Wall Mount User Manual

Step 5: Remove the wire pigtail from the line side of field wiring block.

Step 6: Feed the supply power and ground wires through WattStation enclosure

holes. Slide WattStation onto the mounting bracket, ensuring that the opening in

the back plate bracket aligns with the tab on the wall mount bracket.

Step 7: Connect supply power wires to line side of fuse block and ground wire to

the ground bar.

Step 8: Replace the deadfront shield, the front cover with the provided hardware

and the oval snap-fit ring.

3. User Manual

3.1 Basic Features

! Charging cord and connector provide link to electric vehicle

! LED ring provides illumination around connector

! Green indicator light displays when WattStation is in charge mode

! Red indicator light displays when WattStation is in fault mode

! On/Off button allows total power shutdown

! Tamper-proof / theft-proof key lock secures WattStation to the wall bracket

! Padlock option on connector provides additional physical security

! Availability of plug-in or hardwired version provides installation flexibility

! Entry options for supply power cable include top, bottom and rear and provide

additional flexibility for the hardwired version