Manual

Normal operatingcharacteristics, gecom
These things are normal and
do not indicate a need for service.
::Ji::A wam_ cabinet exterior as the refl_igerafion system transfe_ heat ti'on_ the inside to the outside through
the exterior cabinet walls.
;;Ji::The sound of the high-efficiency compressor m oto_:
Beforeyoucall forservice...
Troubleshooting -tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Possible Causes What ToDo
Freezer does not Temperature control • M()\'e the ((mtrol t() a temperature setting.
operateorPower-On in OFFposition.
Lightis not on Freezer is unplugged. • Push the lalu'"_ completely, into the outlet.
The fuse is blown/circuit * Replace fl/se or reset the breakel:
breaker is tripped.
if )acka-e is holding door/lid open.Freezer staffs/stops Door/lid leo open. • (]he( k to see l
too frequently Too frequent or too long
door/lid openhags.
Temperature control • See About theoperation of your freezer.
set too cold.
Freezer operates Door/lid left open. • (]he('k to see if package is holding door/lid open.
too long Too frequent or too long
door/lid openhags.
Temperature control * See About theoperation of your freezer.
set too cold.
Inadequate air circulation * See Preparingto install the freezer.
space aromad cabinet.
Fast Freeze switch is ha the * See About the operation ofyourfreezer.
ONposition (on some models)
c ! _N
Noisy operation Floor may be weak, causing • Placing 2 X 4 ,_(51 mm X 102 ram) trader the length of
or cabinet vibrates freezer to vibrate when tl/e fl'eezer will help support it and may reduce vibration.
compressor is on.
Cabinet is not positioned * See Preparingto install the freezer.Or use shims tot
solidly on floor, tmeven floor.
Freezer temperature Door/lid left open. • Check to see if package is holding door/lid open.
toowarm
Too frequent or too long
door/lid openings.
11