Specification Sheet
I-36/2008
Most commonly ordered
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
FG5 FILTERGLOW
®
400 LUMINAIRE
High Bay, Enclosed — Optical Sliding Disconnect Series
APPLICATIONS
• For over 20 ft. (6 meter) applications in factories, foundries, machine
shops, and other industrial environments
• 1598 Listed
Suitable For Damp Locations
• Listed to Canadian
standards and codes
• Enclosed and gasketed optics
• Clear tempered door-glass
lens
• Charcoal ltered optics
• Unique optical sliding
disconnect
• 55° C ambient, standard
• In-line EZ Connect
TM
plug-in
adapter port allows for:
• hook/loop, cord & NEMA plug
• plug-in diagnostics
capability
• plug-in modular wiring
systems
• plug-in fuse kits
• Symmetrical heavy-duty
die-cast aluminum ballast
housing with polyester
powder gray or white paint
nish
• Single casting integral
hook/loop and mounting
plate is available
• Threaded slide-in mounting
adapter for easy mounting
• Adjustable mogul base
socket -E39 standard
• ALGLAS
®
nish on
faceted reector
• Safety chain provisions
• Shipped as components:
Ballast, Optical.
Magnapack available for
ballast
See Technical Section
• Pulse start system for metal
halide available. See Page I-131
SPECIFICATION FEATURES
With
EZ Connect
TM
ORDERING NUMBER
LOGIC
FG5
PRODUCT
IDENT
XXX
G
COLOR
X
40
WATTAGE
XX
S
LIGHT
SOURCE
X
0
VOLTAGE
X
A
BALLAST
TYPE
X
E7
OPTICAL
CODE
XX
EX
PHOTOMETRY
CODE
XX
11
MOUNTING
CODE
XX
B
OPTIONS
X
FG5 =
Filterglow
400 Lumi-
naire
G = Gray
W = White
25 = 250
32 = 320
35 = 350
40 = 400
E = Energy
Act Compli-
ant Pulse MH
(EPMH)
S = HPS
For
International
Markets only
M = MH
P = Pulse
Start
MH
Note: Lamp is
vertical base
up. Lamp not
included.
60Hz
0 = 120/208/
240/277
MULTIVOLT
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
D = 347
F = 120X347
T = 220
50Hz
6 = 220
R = 230
Y = 240
G= 380
See Ballast
Selection
Table
A = Autoreg
D =
System
3 Bilevel
Autoreg (See
Technical
Section)
G = CANADI-
AN Mag-Reg
(Grounded
Socket Shell)
H =
HPF Reactor
or Lag
L =
Super Low
Loss Autoreg
M = Mag-
Reg
E7=
Enclosed
17 in.
Reector
E2=
Enclosed
22 in.
Reector
XX = Select
Code
Below
XX = Select Code Below
11 = Pendant mounting
13 = Provision for Slide-on Primary Electrical
Disconnect. Order TWOBP Box (Thru Feed
Capability Only) Separately.
(Not available with D and W option)
14 = Provision for Slide-on Primary Electrical
Disconnect. (Pendant and Thru Feed
Capability) Order PED Box Separately
(Not available with D and W option)
15 =
Prewire with EZ-Loop, Cord and Plug Part of
“Power Hook”. Order Receptacle/Hook Box
Separately. (Not CSA/CUL)
31 =
Prewire with EZ-Hook, 3-ft (0.9 Meters) #16/3
Cord, and Nema Plug
33 =
Prewire with EZ-Loop, 3-ft (0.9 Meters) #16/3
Cord, and Nema Plug (Order locking
receptacle hook box separately.)
67 = Pendant, Nut and Hanger Hub Mounting.
(For use with “D” or “W”, Wet Locations
Option, only) (See pages I-153 and I-154
for details)
MODULAR PREWIRE
41 = ACS with 3-ft (0.9 meter) cord & EZ-Hook
69 = ACS with 6-ft (1.8 meter) cord & EZ-Hook
43 = ACS with 3-ft (0.9 meter) cord & EZ-Loop
70 = ACS with 6-ft (1.8 meter) cord & EZ-Loop
44 = ACS with 9-ft (2.7 meter) cord & EZ-Loop
PLUG-N-GO
51 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Hook
71 = Plug-N-Go with 6 ft. (1.8meter) Cord & Hook
53 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Loop
72 = Plug-N-Go with 6 ft. (1.8 meter) Cord & Loop
Note: ACS = Flex 3+
Plug-N-Go = FSC Series
A = 65°C maximum
ambient*
B = Time Delay
Automatically
Switched
Quartz
D = Severe Duty
(meets Wet
Location)
(For use with
Mounting Code 67
only)
F =
Fusing (Not available
with D or W option)
G = Secondary Wiring
Access. 7/8 in. dia.
knockout
(Not available with
D or W option)
Q = Non-Time Delay
Automatically
Switched Quartz
R = Non-Switched
Quartz.
T = E40 / European
Socket
W = Wet Location
(For use with
Mounting Code 15
and 67 only)
Y = Solo Bilevel Port
(See page I-102)
Note: See page I-104
for Accessory Index and
Descriptions.
Note: See page I-129 for
explanation of Options.
*65°C available for 250
and 400 watt Auto Reg
Ballast only.
Light Spacing Socket Photometric Optical
Photometry
Wattage Source Criteria Position Curve Code Code
350, 400 EPMH 0.7 7 174959 E2 ES
350, 400 EPMH (Coated) 0.7 11 174953 E2 EX
250 - 400 HPS 0.7 2 174963 E2 EN
*
320 watt, ED28 pulse start MH
E7 OPTICAL - Enclosed 17 in. Reector
Light Spacing Socket Photometric Optical
Photometry
Wattage Source Criteria Position Curve Code Code
250, 320* EPMH 1.3 1 176084 E7 EM
350, 400 EPMH 1.1 11 174961 E7 EX
350, 400 EPMH 1.3 9 174962 E7 EU
350, 400 EPMH 1.6 5 177096 E7 EQ
350, 400 EPMH (Coated) 1.0 11 174955 E7 EX
350, 400 EPMH (Coated) 1.5 7 174957 E7 ES
350, 400 EPMH (Coated) 1.9 3 174958 E7 EO
250 - 400 HPS 1.0 5 174965 E7 EQ
250 - 400 HPS 1.4 3 174966 E7 EO
PHOTOMETRIC SELECTION TABLE
E2 OPTICAL - Enclosed 22 in. Reector