Installation Guide

2 31-3000212 Rev. 0
Installation Instructions
WASHER/DRYER INSTALLATION PREPARATION
IMPORTANT: Do not lay the washer or dryer on its
back! Do not remove the shipping bolts on the back
side of the washer. The bolts must remain in place until
the washer is returned to an upright position.
To prevent damage, flatten the product carton to use
as a pad. Then carefully lay the left or right side of the
washer or dryer on top of the flattened product carton.
INSTALLING THE RISER
KIT CONTAINS:
1 Riser Body
2 Leveling
Leg Brackets
18 Short Mounting
Screws
4 Plastic Spacer (A)
6 Long Mounting Screws
4 Metal Brackets
- For Condenser Dryer (B & C)
- For Vented Dryer (D & E)
4 Bolts
4 Leveling Legs