Installation Guide

4 31-3000212 Rev. 0
Installation Instructions
INSTALLING THE RISER ONTO A WASHER (cont.)
4
PLUMBING OF DRAIN HOSE
(Optional)
The drip pan has a drain hose that can be
plumbed into a floor drain.
• Tilt the unit and disengage the hose from the 2
horse collar features.
• Remove the cap from the end of the hose.
• Insert hose into floor drain.
5
REMOVE SHIPPING SCREWS
Remove the 4 shipping screws on the back side
of the unit.
6
FINALIZE THE INSTALLATION
Refer to the washer Installation Instructions to
complete the installation.
NOTE: If a dryer is stacked on top of the
washer, refer to the stacking kit installation
instructions (GFA24KITL).
Drain Hose
Disconnect
Hose Here
Cap