GDF550PSRSS GDF550PGRWW GDF550PGRBB GDF550PMRES

ManualsBrandsGE ManualsBuilt-In Dishwashers24 Inch Full Console Dishwasher with 12 Place Setting Capacity, 4 Wash Cycles, 59 dBA, Dry Boost™, Wash Cycle, Piranha™ Hard Food Disposer, Active Flood Protect, UL Certified, and ENERGY STAR® Qualified: Stainless Steel

PARTS SUPPLIED

• 2 Bottle Jets clips (on some models)

• Junction box cover

• #10 hex-head screw

• Drain hose hanger

• Hose clamp

• 2 Plug buttons

• Toekick (pre-installed on some models)

• 2 Tub trim pieces (on some models)

• Handle and 1/8” Allen wrench (on some models)

• 2 Mounting brackets for wood countertops

or side cabinets

• 2 #8-18 x 5/8” Phillips special head screws,

to secure dishwasher to underside of

countertop or to side cabinets

• Insulation pieces (on some models)

• Literature, samples and/or coupons

TOOLS YOU WILL NEED

• Phillips-head screwdriver

• 1/4” and 5/16” nutdriver

• 6” Adjustable wrench

• Level

• Carpenter’s square

• Measuring tape

• Safety glasses

• Flashlight

• Bucket to catch water when flushing the line

• 15/16” socket

• Gloves

• Pliers

For New Installations Only:

• Tubing cutter

• Drill and appropriate bits

• Hole saw set

MATERIALS YOU WILL NEED

• ´*+7*DUGHQ+RVH7KUHDGÛHOERZLQFOXGLQJ

gasket) - with opposite end sized to fit Hot Water Line

• Thread seal tape

• UL-listed wire nuts (3)

• Masking tape

Materials For New Installations Only:

• Air gap for drain hose, if required

• Waste tee for house plumbing, if applicable

• Electrical cable or Power Cord Kit WX09X70910 (5’ 5” long)

or WX09X70911 (7’ 11” long) depending on installation.

• Strain relief for electrical connection

• Hose clamps

• Hand shut-off valve (recommended)

• Hot Water Line–3/8” minimum, copper tubing (including

ferrule, compression nut) or GE Appliances Part #

WX28X326, flexible braided hose.

• WD24X10065 drain hose (12’ long) or WD24X10062

drain hose (4’ long), if needed.

Installation Preparation

Hole Saw Set

Tubing Cutter

Drill and Bits

Phillips-Head

Screwdriver

15/16” Socket

1/4” and 5/16”

Nutdriver

Bucket

Flashlight

Gloves

Carpenter’s

Square

Safety Glasses

Level

Junction

Box Cover

#10

Hex-Head

Junction

Box Screw

3/8" long

#8 Phillips

Special

Head Screws

5/8" long

Literature

Pliers

Strain

Relief

Optional -

12' Drain Hose - WD24X10065

4’ Drain Hose - WD24X10062

Hot

Water

Line

Waste Tee

Electrical Cable

(or Power Cord,

if applicable)

Wire Nuts (3)

GHT 90°Elbow

Hand

Shut-Off

Valve

Air Gap

Plug

Buttons

Masking Tape

Toekick

Tub Trim Pieces

(on some models)

Insulation

(on some models)

Mounting

Brackets

Drain Hose Hanger

Thread

Seal Tape

(if applicable)

6” Adjustable

Wrench

Hose

Clamps

Measuring Tape

Hose Clamp

Handle and 1/8” Allen wrench

(on some models)

Bottle

Jets clips

(on some

models)