Specification

MATERIAL SAFETY DATA
SHEET
Version: 1.6
07/16/2012
GE5100
Silicone Rubber Sealant
Page 4/9
7. HANDLING AND STORAGE
PRECAUTIONS TO BE TA
KEN IN HANDLING AND
STORAGE
Use only in well-ventilated areas. Avoid contact with skin and eyes. Keep out of reach of children.
Remove contact lenses before using sealant. Do not handle lenses until all sealant has been cleaned
from the finger and hands. Keep away from heat, sparks and open flame.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
RESPIRATORY PROTECTI
ON
If exposure limits are exceeded or respiratory irritation is experienced, NIOSH/MSHA approved
respiratory protection should be worn. Supplied air respirators may be required for non-routine or
emergency situations. Respiratory protection must be provided in accordance with OSHA regulations
(see 29CFR 1910.134).
PROTECTIVE GLOVES
Cloth gloves.
EYE AND FACE PROTECTION
Safety glasses with side shields
OTHER PROTECTIVE EQU
IPMENT
Wear suitable protective clothing and eye/face protection.
Exposure Guidelines
Component
CAS
-
No.
Source
Value
Octamethylcyclotetras
iloxane
556-67-2 Z_INTL_OEL, REL 5 ppm
Absence of values indicates none found
PEL - OSHA Permissible Exposure Limit; TLV - ACGIH Threshold Limit Value; TWA - Time Weighted Average; INTL REL - Internal
Recommended Exposure Limit
OSHA revoked the Final Rule Limits of January 19, 1989 in response to the 11th Circuit Court of Appeals decision (AFL-CIO v. OSHA)
effective June 30, 1993. See 29 CFR 1910.1000 (58 FR 35338).
9. PHYSICAL AND CHEMICAL PROPERTIES
BOILING POINT (
°
C)
:
Not applicable
VAPOR PRESSURE (20 C
) (MM HG)
:
Not applicable
(or GE57)