RM24948 Universal Remote Instruction Manual
Table of Contents Introduction ........................................................... 3 Setup .................................................................... 3 Battery Installation ........................................... 3 Battery Saver ................................................... 3 Code Saver ...................................................... 3 Code Setup ...................................................... 3 Button Functions .............................................
Button Functions POWER Turns product On or Off. Code Entry using the Code List Red Indicator Lights when any button is pressed. SETUP Used to setup the remote, and for code search function. TV, CBL/AUX, VCR/DVD Selects product to be operated. CHANNEL Up/Down Changes the channels. Also controls DVD SKIP functions. MUTE Turns off the TV sound, while the picture remains. VOLUME UP/DOWN Changes the volume level of the product, normally the TV.
Setting up using Code Search If your TV does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps: 1. Manually turn on the device (TV, VCR, etc.) to be controlled. 2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 3. Press and quickly release the desired device button (TV, VCR/DVD, etc.). The red indicator blinks off once. 4.
Using Your Remote, cont. Using Your Remote, cont. Controlling Devices with Separate Power On and Off Buttons Setting ALL Volume/Mute Control to any one Mode Some GE, RCA and ProScan models require you to press the device button for more than one second to turn the device on and the POWER button to turn the device off. This routine can set all Modes to “punch-through” to any one chosen Mode for Volume/Mute button control without the needing to change to that Mode.
Troubleshooting Remote does not operate your product. • • • • Press the device button of the product you want to control. Program the remote with a new code. Install new batteries. (You might have to reprogram your remote after installing new batteries.) Remote may not be compatible with your product. Remote does not operate some features of your product. • • Sometimes a particular code might operate some features but not all. Try programing remote with a new code.
RM24948 Universal Remote Instruction Manual Jasco Products Company 311 N.W.