WATER HEATERS Instantaneous Electric SAFETY INFORMATION. . . . . . . . . . . 3 OPERATING INSTRUCTIONS. . . . . 5 CARE AND CLEANING. . . . . . . . . . . . 5 ABOUT THE CONTROL PANEL . . 6 ABOUT REMOTE CONTROL. . . . . . 8 INSTALLATION INSTRUCTIONS. 9 TROUBLESHOOTING TIPS. . . . . . . 17 OWNER’S MANUAL GE Branded Electronic GE04SNLPDG GE06SNHPDG GE08SNHPDG GE11SNHPDG GE15SNHPDG GE18SNHPDG GE24DNHPDG GE27DNHPDG WIRING DIAGRAMS . . . . . . . . . . . . . . 17 LIMITED WARRANTY . . . . . . . . . . .
THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME. Whether you grew up with GE Appliances, or this is your first, we’re happy to have you in the family. We take pride in the craftsmanship, innovation and design that goes into every GE Appliances product, and we think you will too. Among other things, registration of your appliance ensures that we can deliver important product information and warranty details when you need them. Register your GE appliance now online.
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. Be sure to read and understand the entire Owner’s Manual before attempting to install or operate this water heater. It may save you time and cost. Pay particular attention to the Safety Instructions.
SAFETY INFORMATION IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE WATER TEMPERATURE ADJUSTMENT ! Safety, energy conservation, and hot water capacity are factors to be considered when selecting the water temperature setting of the water heater. Water temperatures above 125°F can cause severe burns or death from scalding. Be sure to read and follow the warnings outlined on the label pictured to the left.
Water Heater Capacity and Increasing Temperature Setpoint (For Water Heaters without an Integrated Mixing Valve): The water heater temperature setting strongly impacts the amount of usable hot water available for showers and baths. • Energy consumption/savings and efficiency testing of water heaters is performed according to Department of Energy (DOE) requirements specified at the date of manufacture. • Safety regulations require a factory setting no greater than 125°F (52°C) for all new water heaters.
ABOUT THE CONTROL PANEL About the Control Panel Models: GE04SNLPDG, GE06SNHPDG, GE08SNHPDG, GE11SNHPDG, GE15SNLPDG Displaying Temperature Setpoint To Adjust the Temperature The control will display the temperature setpoint anytime a button on the control is pressed. After 30 seconds of inactivity, the display will go blank. To wake the control at any time to see the temperature setpoint, press the ENTER button on the control. Turning on the Water Heater There is no power button for these models.
Models: GE18SNHPDG, GE24DNHPDG, GE27DNHPDG Displaying Temperature Setpoint To Adjust the Temperature The control will display the temperature setpoint anytime a button on the control is pressed. After 30 seconds of inactivity, the display will go blank. To wake the control at any time to see the temperature setpoint, press the ENTER button on the control. Turning on the Water Heater There is a power button for these models.
ABOUT THE CONTROL PANEL About the REMOTE CONTROL For Applicable Models Operating the Remote Control 1. Display 2. + Select Button Use these buttons to increase the temperature setting or vacation days. 3. Enter Button Use this button to confirm temperature setting following adjustment. Note: To change between °F and °C, press and hold the ENTER button for 3 seconds. 4. - Select Button Use these buttons to decrease the temperature setting or vacation days.
The location chosen for the water heater must take into consideration the following: LOCAL INSTALLATION REGULATIONS This water heater must be installed in accordance with these instructions, local codes, utility codes, utility company requirements or, in the absence of local codes, the latest edition of the National Electrical Code. It is available from some local libraries or can be purchased from the National Fire Prevention Association, Batterymarch park, Quincy, MA 02169 as booklet ANSI/NFPA 70.
INSTALLATION INSTRUCTIONS Installation Instructions ELECTRICAL CONNECTIONS A separate branch circuit with copper conductors, overcurrent protective device and suitable disconnecting means must be provided by a qualified electrician. All wiring must conform to local codes or latest edition of National Electrical Code ANSI/NFPA 70. The voltage requirements and wattage load for the water heater are specified on the rating label on the front of the water heater.
ELECTRICAL CONNECTIONS To establish electrical connections for the water heater, reference the following diagrams for each applicabel model. NOTE: Model number can be found on the product rating label. Make sure you are referencing the correct diagram for your model of water heater. Tools required: • Phillips head screwdriver • Flat head screwdriver • Scissors Models: GE04SNLPDG, GE06SNHPDG To connect power to the water heater: 1. Turn the power off at the fuse or circuit.
INSTALLATION INSTRUCTIONS Installation Instructions ELECTRICAL CONNECTIONS To establish electrical connections for the water heater, reference the following diagrams for each applicabel model. NOTE: Model number can be found on the product rating label. Make sure you are referencing the correct diagram for your model of water heater. Tools required: • Phillips head screwdriver • Flat head screwdriver • Scissors Models: GE08SNHPDG, GE11SNHPDG, GE15SNHPDG To connect power to the water heater: 1.
ELECTRICAL CONNECTIONS To establish electrical connections for the water heater, reference the following diagrams for each applicabel model. NOTE: Model number can be found on the product rating label. Make sure you are referencing the correct diagram for your model of water heater. Tools required: • Phillips head screwdriver • Flat head screwdriver • Scissors Models: GE18SNHPDG, GE24DNHPDG, GE27DNHPDG To connect power to the water heater: 1. Turn the power off at the fuse or circuit.
INSTALLATION INSTRUCTIONS Installation Instructions Mounting Your Water Heater To mount your water heater NOTE: Model number can be found on the product rating label. Make sure you are referencing the correct diagram for your model of water heater. The water heater should be mounted on a surface using the screw slots located on the rear case of the water heater with a minimum of 4 screws (provided with the product).
Plumbing Connections NOTICE: It is recommended that this water heater be installed by a licensed and qualified plumber in accordance with all applicable national, state, and local plumbing codes. Important Notes for all Models: DO NOT apply heat to the HOT or COLD water connections. If sweat connections are used, sweat tubing to adapter to the cold water connections on heater. Any heat applied to the hot or cold water connections can cause permanent damage to internal heat exchanger.
INSTALLATION INSTRUCTIONS Installation Instructions Plumbing Connections To make plumbing connections for water heater, reference the following diagrams for each applicable model. NOTE: Model number can be found on the product rating label. Make sure you are referencing the correct diagram for your model water heater. Tools required: • Pipe joint compound or pipe thread sealant tape • Pipe wrench (x2) Plumbing Installation 1. Ensure that water supply is turned OFF at shut-off valve. 2.
Before you call for service.... Save time and money! Review the chart below first and you may not need to call for service. CAUTION For your safety, DO NOT attempt repair of electrical wiring, controls, heating elements or other safety devices. Refer repairs to qualified service personnel. Problem Possible Causes What To do Digital display is not activated No power or incorrect wiring Check breakers at main electrical panel to ensure it is not tripped. If tripped, reset breaker.
NOTES 18 Notes 49-6000243 Rev.
Models: 04 L 06S Models: 11 H 15S 49-6000243 Rev.
WIRING DIAGRAM Wiring Diagram Models: 18S Models: 20 49-6000243 Rev.
All warranty service is provided by our Factory Service Centers, or an authorized Customer Care® technician. To schedule service for your GE water heater call GE Water Heaters at 1-800-943-8186. Please have your serial number and your model number available when calling for service. Servicing your appliance may require the use of the onboard data port for diagnostics.
CONSUMER SUPPORT Consumer Support Register Your Appliance Register your new appliance on-line at your convenience! Timely product registration will allow for enhanced communication and prompt service under the terms of your warranty, should the need arise. • Scan QR Code on product registration card, or on product. NOTE: This is just an example of what a QR code represents. • Or go to GEAppliances.