MSDS

Material Safety Data Sheet
Version: 1.3
09/10/2007
GE284 3TG-TUBE(0.198LBS-0.090KG)
SILICONE SEALANT
Page 3/3
medical attention if irritation persists.
NOTE TO PHYSICIAN
None known.
5. FIRE-FIGHTING MEASURES
FLASH POINT:
> 9,393 °C; 16939 °F
METHOD:
estimated
IGNITION TEMPERATURE:
Unknown
FLAMMABLE LIMITS IN AIR - LOWER (%):
Not applicable
FLAMMABLE LIMITS IN AIR - UPPER (%):
Not applicable
SENSITIVITY TO MECHANICAL IMPACT:
No
SENSITIVITY TO STATIC DISCHARGE
Sensitivity to static discharge is not expected.
EXTINGUISHING MEDIA
All standard extinguishing agents are suitable.
SPECIAL FIRE FIGHTING PROCEDURES
Firefighters must wear NIOSH/MSHA approved positive pressureself-contained breathing
apparatus with full face mask and fullprotective clothing.
6. ACCIDENTAL RELEASE MEASURES
ACTION TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED
Wipe, scrape or soak up in an inert material and put in a container for disposal. Wash walking
surfaces with detergent and water to reduce slipping hazard. Wear proper protective equipment as
specified in the protective equipment section.
7. HANDLING AND STORAGE
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE
Avoid contact with skin and eyes. Product releases methanol during application and curing. Use
mechanical ventilation to stay below TLV of 25 ppm ammonia. Keep container tightly closed. Remove
contact lenses before using sealant. Do not handle lenses until all sealant has been cleaned from the
fingertips, nails and cuticles. Residual sealant may remain on fingers for several days and transfer to
lenses and cause severe eye irritation. Store away from heat, sources of ignition, and incompatibles.
Keep away from children.