SDS

Material Safety Data Sheet
Version: 1.6
09/06/2007
GE612 12C-Crtrg (0.730 Lbs-0.331 Kg)
Silicone Rubber Sealant
Page 3/8
5. FIRE-FIGHTING MEASURES
FLASH POINT:
> 93.3 °C; 200 °F
METHOD:
estimated
IGNITION TEMPERATURE:
No data available
FLAMMABLE LIMITS IN AIR - LOWER (%):
Unknown
FLAMMABLE LIMITS IN AIR - UPPER (%):
Unknown
SENSITIVITY TO MECHANICAL IMPACT:
No
SENSITIVITY TO STATIC DISCHARGE
Sensitivity to static discharge is not expected.
EXTINGUISHING MEDIA
All standard extinguishing agents are suitable.
SPECIAL FIRE FIGHTING PROCEDURES
Firefighters must wear NIOSH/MSHA approved positive pressureself-contained breathing
apparatus with full face mask and fullprotective clothing.
6. ACCIDENTAL RELEASE MEASURES
ACTION TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED
Wipe, scrape or soak up in an inert material and put in a container for disposal. Wash walking
surfaces with detergent and water to reduce slipping hazard. Wear proper protective equipment as
specified in the protective equipment section.
7. HANDLING AND STORAGE
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE
Keep container closed when not in use. Avoid contact with skin, eyes and clothing. Keep away from
children. Remove contact lenses before using sealant. Do not handle lenses until all sealant has been
cleaned from the fingertips, nails and cuticles. Residual sealant may remain on fingers for several
days and transfer to lenses and cause severe eye irritation. Product releases acetic acid during
application and curing.
STORAGE
Store at room temperature in the original container. Keep container closed.