User's Manual

Consumer Support Troubleshooting Tips Installation Instructions Care and Cleaning Operating Instructions Safety Instructions
10
Using the oven.
Throughout this manual, features and appearance may vary from your model.
Lighting Instructions for Electric Ignition Models
The oven burner is lighted by electric ignition.
To light the burner, turn the OVEN TEMP
knob to the desired temperature. The
burner should light within 30-90 seconds.
After the oven reaches the selected
temperature, the oven burner cycles on
and off to maintain the selected
temperature.
Power Outage—Electric Ignition Models
CAUTION: Do not make any attempt to
operate the electric ignition oven during an
electric power failure. The oven or broiler
cannot be lit during a power failure. Gas
will not flow unless the glow bar is hot.
If the oven is in use when a power failure
occurs, the oven burner shuts off and
cannot be re-lit until power is restored.
This is because the flow of gas is
automatically stopped and will not
resume when power is restored until
the glow bar has reached operating
temperature.
Lighting Instructions for Standing Pilot Models
The standing oven pilot must be lit initially.
To light the oven pilot:
Be sure the OVEN TEMP knob is in
the OFF position.
Remove the oven bottom or open
the broiler door and remove the
broiler pan. See the Care and
cleaning of the range section.
Find the oven pilot port at the back
of the oven.
Using a long match or match holder,
reach in and light the oven pilot.
Replace the oven bottom (if
removed) and close the door.
Your oven and broiler are now
ready for use.
■ To light the oven burner, turn the
OVEN TEMP knob to the desired
temperature. The burner should
light within 60 seconds.
■ Power failure? An electrical power
failure will not affect the standing
oven pilot.
Power Outage—Standing Pilot Models
An electrical power failure will not affect
the standing oven pilot.