Full Product Manual

Installation Instructions
CONNECTING A GAS DRYER (skip for electric dryers)
• Before beginning the installation, turn off the
circuit breaker(s) or remove the dryer’s circuit
fuse(s) at the electrical box. Be sure the dryer
cord is unplugged from the wall.
• Turn the dryer’s gas shut-off valve in the supply
line to the OFF position.
• Disconnect and discard old flexible gas connector
and ducting material.
Shut-off
Valve
18
MATERIALS YOU WILL NEED
 4” dia. metal elbow

Pipe compound or
PTFE tape

Flexible gas line
connector

Duct clamps (2) or
Spring clamps (2)

Safety glasses

4” dia. metal duct
(recommended)

4” Cover plate (Kit
WE49X22606)

4” dia., UL-listed
flexible metal duct
(if needed)

Gloves
 Soap solution for
leak detection

Exhaust hood

Duct tape

Gas pipe adapters (2),
elbow and pipe plug
TOOLS YOU WILL NEED
 10” Adjustable
wrenches (2)

8” Pipe wrench

Flat-blade
screwdriver

Level

Slip-joint pliers
 4’-6’ Water Hose
(on some models)