Spec Sheet

ManualsBrandsGE ManualsAppliances7.8 cu. ft. Smart 120-Volt White Stackable Gas Vented Dryer with Sanitize Cycle, ENERGY STAR

Specification Created 9/19

For answers to your Monogram, GE Café

™

Series, GE Profile

™

Series or

GE Appliances product questions, visit our website at geappliances.com

or call GE Answer Center

Service, 800.626.2000.

GFD55GSSN/GSPN

7.8 cu. ft. Capacity Front Load Gas Dryer

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

EXHAUST OPTIONS: 4-way via rear, left, right,

and bottom.

CIRCUIT REQUIREMENTS: An individual,

properly grounded branch circuit, protected by a

15-20 amp circuit breaker or a time-delay fuse, is

required.

NOTE: Dryer wall outlet must be located within

36" of service cord entry and accessible when dryer

is mounted in position.

INSTALL ATION INFORMATION: For complete

information, see installation instructions packed

with your dryer.

GAS DRYER RATING

120V 60Hz, 6A

39-3/4

6-1/8

3-5/8

Summary of content (4 pages)

PAGE 1
GFD55GSSN/GSPN GE® 7.8 cu. ft. Capacity Front Load Gas Dryer DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES) GAS DRYER RATING 120V 60Hz, 6A EXHAUST OPTIONS: 4-way via rear, left, right, and bottom. 28 32 CIRCUIT REQUIREMENTS: An individual, properly grounded branch circuit, protected by a 15-20 amp circuit breaker or a time-delay fuse, is required. NOTE: Dryer wall outlet must be located within 36" of service cord entry and accessible when dryer is mounted in position.
PAGE 2
GFD55GSSN/GSPN GE® 7.8 cu. ft. Capacity Front Load Gas Dryer STACKED INSTALLATION: Brackets for stacking dryer over washer are not included with the washer. Order part no. GEFLSTACK or part no. WE25X10018. STACKED DIMENSIONS (IN INCHES) 54-1/2 " ALCOVE OR CLOSET INSTALLATION: If your dryer is approved for installation in an alcove or closet, it will be stated on a label on the dryer back. The dryer MUST be exhausted to the outside.
PAGE 3
GE Dryer Vent GE Dryer Vent GFD55GSSN/GSPN GE® 7.8 cu. ft. Capacity Front Load Gas Dryer DRYER EXHAUSTING INFORMATION – METAL DUCT ONLY For complete information, see installation instructions packed with your dryer. DUCTING MATERIALS: For best performance, this dryer should be vented with 4” diameter all rigid metal exhaust duct. If rigid metal duct cannot be used, then UL-listed flexible metal (semi-rigid) ducting can be used (Kit WX08X10077).
PAGE 4
GFD55GSSN/GSPN GE® 7.8 cu. ft. Capacity Front Load Gas Dryer FEATURES AND BENEFITS Built-in WiFi – Enjoy the ultimate convenience of monitoring and controlling your laundry from anywhere and receiving real-time notifications and updates.