Quick Start Manual

Installation Instructions

STEP 11 – SECURE DISHWASHER TO

CABINET

The dishwasher must be secured to the countertop.

•Position the dishwasher so that the tub flange aligns

with the front face of the cabinet frame.

IMPORTANT - Check to be sure the

dishwasher is centered in the opening and there is no

interference with adjacent cabinets when opening or

closing the door.

•Fasten the dishwasher to the underside of the

countertop with the 2 Phillips screws provided.

IMPORTANT - Drive screws straight and

flush. Protruding screw heads will scratch the top of the

control panel and can interfere with door closing.

Figure

Align Tub

Flange

to Front

Face of

Cabinet

Frame

STEP 12 – CONNECT WATER SUPPLY

Connect water supply line to 90° elbow.

•Slide compression nut, then ferrule over end of water line.

•Insert water line Into 90 elbow .

•Slide ferrule against elbow and secure with compression

nut.

IMPORTANT - Check to be sure

that door spring does not rub or contact the fill hose or

water supply line. Test by opening and closing the door.

Re-route the lines if a rubbing noise or interference

occurs.

Figure 19

Ferrule

90 Elbow

Compression Nut

Hot Water

Supply Line

90 Elbow