Manual

Dishesandflatware
notclean
Possible Causes
Low inlet water
temperature
What ToDo
Make sure inlet water
temperature is con-ect
(see page 11).
Use HITEMPWASH.
Spotsandfilming
onglassesand
flatware
Water pressure is
temporarily low
Air gap is clogged
Improper rack loading
Extremely hard water
Low inlet water
temperature
Overloading the
dishwasher
Improper loading
Old or damp powder
detergent
Rinse agent dispenser
empty
Too little detergent
Tm-n on a faucet. Is water
coming out more slo_dy
than usual? If so, wait until
pressure is normal before
using your dishwasher.
Clean the air gap.
Make sure large dishware
does not block the
detergent dispenser or the
wash arms.
Use Jet-Dry® rinse agent to
remove spots and prevent
new fihn build-up.
To remove stubborn spots
and pre-existing fihn flom
glassware:
1 Remove all metal utensils
flom tim dishwasher.
2 Do not add detergent.
3 Select tim longest cycle.
4 Slart the dishwasher and
allow to nm for 18 to 22
minutes. Dishwasher xdll
now be in the main wash.
5 ()pen the door and pour
2 cups (500 ml) of white
_qnegar into the bottom of
the dishwasher.
6 Close the door and allow
to complem tim cycle.
If vinegar rinse doesn' t
work: Repeat as above,
excepl use 1/4 cup (60 ml)
of citlic acid cusmls
instead of vinegm.
21