Manual

Options
Thelight abovethe selected pad will be ON to indicate which OPTIONhasbeen selected.
HI TEMP Turnson the heaterin all postrinseandfinal rinsecyclesto helppreventspotting
RINSE on dishware.Thisoptionmaybeturned ONor OFFduringthe wash cycle.
HI TEMP Energizesthe heaterto boostwatertemperaturein all prewashand mainwashfill
WASH cycles.Recommendedfor usewith heavilysoileddishes.Optionmaybeturned ON
or OFFduringthe wash cycle.
HEATEDDRY Shutsoff the dryingheat option.Dishesairdry naturallyand energyis saved.You
OFF canprop the dooropenafter the CLEANlight illuminates.
HEATEDDRY Turnsthe heateronfor fast drying.Thiscyclewill extendthe timeto your wash
ON cycleby30 minutes.NOTE:Cannotbeselectedwith RINSE ONLYcycle.
LOCK WhentheLOCKpadistouchedtwicewithin 3 seconds,allpadsbecomeinoperative.
Youcanlockthecontrolstopreventanyse/ectionsfrombeingmade.Oryoucanlockthe
controlsafteryouhavestartedacycleorse/ectedDEZAYSTARTsothecycleorDELAY
STARTisnot interrupted
Children cannot accidentafly start dishwasher by touching pads with this
option selected.
Tounlockthe dishwasherafter it hasbeenlocked,touchthe LOCKpadtwicewithin
3seconds.Thelightabovethe LOCKpadwill turnoff.
DELAYSTART
Youcandelaythe start of a wash cyclefor upto 8 hours.Pressthe DELAYSTART
padto choosethe numberof hoursyou wantto delaythe start of the cycle.The
machinewill countdownandstart automaticallyatthe correcttime. Pressing the
START/RESETbutton will cancel the DELAY STARTselection,
NOTE:If youforget to latchthe doora remindersignalwill beepuntil you doso.
RESET Tochangea cycleafter washing starts,touchthe START/RESETpadto cancel
the cycle. After water is pumpedout and the motorstops,you canreprogramand
restart the dishwasher.Thiswill take approximately90 seconds.
li ii
Close and latch the door. Touch the START/RESETpadto begin the cycle. Water
fill begins and approximamly 40 seconds later the wash action begins.
NOTE.'The dishwasher remembers your last cycle so you don't have to reprogTam
each time. When the dishwasher is loaded and the door latch is in the locked
position, the conuol panel lights will be 0N and displ W the last settings you
selected.
If you don't want to change any of the settings, simply touch the START/RESET
pad to begin the cycle.
Also, ira power t_dlure occurs, NORMALand HEATEDDRYwill automatically be
programmed. Make any new selections and l,)uch the START/RESETpad_,_be_n
the cycle.
This light isilluminamd when awash c}vleis complete. The lightwillstay ON
until the door is opened.
0