Manual

Beforeyou call for service...
Troubleshooting Tips
Review the charts on the following pages first and you may not
need to call for service.
Possible Causes What To Do
Time too long between
touching of selected pads
Controlpanel lightsgo
offwhenyou're settin9
controls
Theword AUTOdoesn't
appearin thedisplay
The sensor is dogged
or faulty
Each pad must be touched
_4thin 30 seconds of the
others. To relight, touch
aW pad again, or unlock
and relatch door.
T_7 using tim below steps
to clear the sensor:
I Remove all metal
utensils flom the
dishwasher.
2 DONOTADD DETERGENT.
3 Select POTSPANS_Tcle
and ENERGYSAVERDRY
OFF.
4 Stml the dishwasher and
allow to run until tim
time remaining in the
cycle appears in the
display.
5 Then open the door and
pour 1/4 cup ofcitric
acid oystals into the
bottwm of the
dishwasher. (Most
drugstores can): citlic
acid oTs/als. If yours
doesn't, call GE Se_qce
and Paris Centers.)
6 Close the door and allow
the dishwasher to
complete the cycle.
If dm problem continues
call tor se_qce.
Dishwasher won't run
Fuse is blown, or the
circuit breaker tripped
Replace t;ase or reset
circuit breaker. Remove
aW other appliances flom
the (ir(uit.
T_7 resetting the display
panel.
22