Manual

Before you carl for service...
Possible Cause'_s-- What ToD'_'o_
Dishes andflatware Inlet water temperature Raise the wa/ev heater
notclean isbelow 120°F. tempevatme tn 120°F.
Use HITEMPWASH.
Water pressure is Turn (m a thuce/. Is water
temporarily low coming out move slowly
/han usual? If so, wait until
pvessme is normal betbve
using your dishwasher.
Spotsandfilming
ong/asses and
flatware
Air gap is clogged Clean the air gap.
Improper rack loading Make sure large dishware
does not block the
dete_genl dispenser or the
wash ainu.
Extremely hard water
Low inlet water
temperature
Overloading the
dishwasher
Improper loading
Old or damp powder
detergent
Rinse agent dispenser
empty
Too tilde detergent
Use Jet-Dry ® rinse agem to
remove spo/s and prevenl
new fihn build-up.
To remove stubborn spots
and pre-existing tihn tiom
glassware:
I Remove all metal utensils
flom the dishwasher.
2 Do not acid demtgent.
3 Select the long_st cycle.
4tStart the dishwasher mad
allow to run fbr 18 to 22
minutes. Dishwasher will
now be in the main wash.
5 ()pen the door and pour
2 cups (500 ml) of while
xqnegar into the bottom of
the dishwasher.
6 Close the door and allow
to complete tim cycle.
If vinegar rinse doesn't
work: Repeat as above,
except use 1/4 (:up (60 ml)
ofciwic acid c_ystals
instead of vinegar.
22