Manual

opt o,s

Thelight abovethe selectedpad will be ON to indicate which OPTIONhasbeen selected.

POWER Forusewith heavilysoiledand/or dried-on,baked-onsoils. Thisoption

PRESOAK MUSTbe selectedPRIORtostarting the cycle. Thisoption adds 16

minutes to the cycle time.

HI TEMP RINSE Turnsonthe heaterin all prerinseandfinal rinsecyclesto help prevent

spottingon dishware.Thisoption maybeturned ONor OFFduringthe

washcycle.

HEATEDDRY Shutsoff the dryingheatoptions.Dishesairdry naturallyandenergyis

OFF saved.Youcanpropthe dooropenafter the light goesON nextto the

word CLEANwhich appearsin the STATUSdisplayfor faster drying.

HEATEDDRY Turnsthe heateron for fast drying.This cyclewill extendthe time

ON to your washcycle by 30minutes.NOTE:Cannotbe selectedwith

RINSE& HOLDcycle.

LOCK WhentheLOCKpadistouchedtwicewithin3seconds,allpadsbecome

inoperative.Youcanlockthecontrolstopreventanyse/ectionsfrombeingmade.

Oryoucanlockthecontrols"afteryouhavestarteda cycleorselectedDELAY

STARTsothecycleorDELAYSTARTisnot interrupted

Children cannot accidentally start dishwasher by touching pads

with this option selected.

Tounlockthedishwasherafter it hasbeenlocked,touchthe LOCKpadtwice

within3 seconds.ThelightabovetheLOCKpadwill beoff.

DELAYSTART

Youcan delaythe start of a washcyclefor up to 8hours.Pressand hold

the BELAY STARTpadto choosethe numberof hoursyouwant to delay

the startof thecycle.Themachinewill countdownandstart automatically

at the correcttime. NOTE:If youforget to lockthe doora remindersignal

will beepuntil you doso.

RESET

Tochangea cycleafter washingstarts,touchthe START/RESETpadto

cancelthe cycle.After water is pumpedout and motorstops,you can

reprogramand restartthe dishwasher.

Start

Close the door until it locks into place and touch the START/RESETpadto

begin the (T(le. There is a time delay between stalt-up and water fill soyou

will not hear aW wash action fight awW.

The tTcle is complete when the light is 0Nnext to the word CLEANin the

STATUSdisplay.

NOTE."The dishwasher remembers your last wcle so you don't have to

reprogram each time. %qmn the dishwasher is loaded and door latch is

in the locked position, the conuol panel lights will be ONand displ W the

last settings you selected.

If you don't want to change aW of the settings, simply t(mch the

START/RESETpadto begin the (Tcle.

Also, ifapower t_dlmeoccurs, NORMALand HEATEDORYx_illautomatically

be programmed. Make anynew selectionsand louch the START/RESET

pad Iobegin the cycle.