Installation Instructions

TOOLS YOU WILL NEED:
• Safety glasses
1/4" and 5/16" nutdrivers
• Flashlight
• Gloves
Adjustable wrench (6”)
Phillips head screwdriver
15/16" socket wrench
• Measuring tape
• Level
• Carpenters square
Bucket to catch water when flushing
water line
• Tubing cutter
FOR NEW INSTALLATIONS:
Hole saw set
Drill and appropriate bits
PARTS SUPPLIED IN INSTALLATION
PACKAGE:
Two 8-18 x 5/8" Phillips head wood screws
Junction box cover and #10 hex head screw
Drain hose (78" long) and hose clamp
Literature, product samples, and/or
coupons
MATERIALS YOU WILL NEED:
WX09X70910 or WX09X70911 power cord if
applicable to your installation
UL Listed wire nuts (3)
Thread seal tape
Depending on model, 90° elbow (¾” hose
internal thread on one end, opposite end
sized to fit water supply) -OR- ferrule,
compression nut and 90° elbow (3/8” NPT
external thread)
GPF65 Side-mount bracket kit for use with
granite countertops
FOR NEW INSTALLATIONS:
Electrical cable
Water line–3/8" minimum copper tubing
(including ferrule and compression nut)
Strain relief for electrical connection
Hand shut-off valve (recommended)
Air gap for drain hose, if required
Waste tee for house plumbing, if applicable
Screw type hose clamps
GPF95, GPF96 or GPF97 stainless steel sink
Hose Clamp
78" Drain Hose
Thread
Seal Tape
3 Wire Nuts
Electrical Cable or
WR09X70910 or
WX09X70911 Power Cord
Screw Type
Hose Clamps
Phillips Head
Screwdriver
Level
Measuring Tape
Safety Glasses
Flashlight
Hole Saw Set
Drill
and Bits
Waste Tee
Strain Relief
Hot Water Line–3/8"
Minimum Copper
Tubing
Gloves Adjustable
Wrench
Tubing Cutter
GPF65 Side-Mount
Bracket Kit
#8
Phillips Head
Wood Screws
5/8" long
Screw Kit
#10
Hex Head
Junction Box Screw
1/2" long
Junction Box Cover
2
15/16"
Socket Wrench
6KXW2ȹ9DOYH Air Gap
Bucket
1/4" and 5/16" Nutdrivers
GPF95
Stainless Steel Sink
GPF96
Stainless Steel Sink
GPF97
Stainless Steel Sink
Coupler for
optional drain
hose
90° Elbow or Ferrule
and Compression Nut
(depending on model)
Carpenters
Square