User Manual

Installation Instructions
Tilt the dryer sideways and remove the foam
shipping pads by pulling at the sides and breaking
them away from the dryer legs. Be sure to remove all
of the foam pieces around the legs.
Remove literature and bag containing accessories.
UNPACKING YOUR DRYER
STEAM WATER HOSES:
GE Appliances strongly recommends the use of factory
specified parts. These hoses are manufactured and tested to
meet GE Appliances specifications.
GE Appliances strongly recommends the use of new water
supply hoses. Hoses degrade over time and need to be
replaced every 5 years to reduce the risk of hose failures and
water damage.
Parts and Accessories
Order on-line at GEApplianceParts.com, 24 hours a day or
by phone at 800.626.2002 during normal business hours.
Part Number Accessory
WE25X20060 Complete Kit (hoses, Y-adapter
washers) (included)
OR
WE1M847 Long Hose and
WE01X22395 Short Hose
PM14X10056 Dryer door opening vent brush
(not included)
WX14X10007 LintEater™ Dryer rotary tube brush
(not included)
2
ROUGH-IN
DIMENSIONS
4 5/8”
(11.7 cm)
or
6 1/2”
(16.5 cm)
with Riser
Y
X
27”
(68.8 cm)
X
4 1/4”
(10.8 cm)
Side ViewFront View
Cubic
Foot
XY
6.2
43 3/8”
(110 cm)
26 3/4”
(68 cm)
7.2
43 3/8”
(110 cm)
29 1/2”
(75 cm)
7.4
43 3/4”
(111 cm)
30 1/2”
(78 cm)
7.4
(with
Riser)
45 1/2”
(116 cm)
30 1/2”
(78 cm)
State of California Proposition 65 Warnings
WARNING
This product contains one or more chemicals known to the State of California to cause cancer, and birth
defects or other reproductive harm.
Gas appliances can cause low-level exposure to some of these substances, including benzene, carbon monoxide, formaldehyde,
and soot, caused primarily by the incomplete combustion of natural gas or LP fuels. Exposure to these substances can be
minimized by properly venting the dryer to the outdoors.