Manual

About the water softener system.
Service: Electronic Demand Time Features and Service
ERRORCODE
DISPLAYED ERR03 ERR04 ERR05
POSSIBLEDEFECT • Control
ERR01
• Motor
inoperative
• Wiring
harnessor
connection
to switch
• Position
switch
• Control
ERR02
• Position
switch
• Control
• Motor
inoperative
or wiring
harness
• Control
• Position
switch or
wiring
harness
• Control
Toremovean errorcode: I. Unplugtransformer.
Z Correct defect.
3. Plugtransformerin.
4. Waitfor at least 6minutes.Theerror code will returnif the reason for
the error code was not corrected.
Service: Timer/Softener, Service Checkout Procedure
If you are not getting soft water; and an error
code is not displayed, use the procedures below
to find the problen_, First make the fi)llowing
visual checks,
VISUALCHECKS:
I. Is there electrical power to the outlet the
water sottening system transfi)_ner is
plugged into?
2. Is there sufficient salt in the storage tank?
3. Is the sottener bypass wflve directing water
tor soti water service?
4 Is the valve drain hose open to the drain,
not illoi'e than S' above the sottenei', }111(1
unobstructed? If hose is above 8', see page 7,
section 4.
If you do not find a problem with the visual checks,
continue below
CONTROLSHOWS I Electricalpowerwasoff.
WRONGTIMEANDDAY, _ Resetthecorrecttimeof
AND/ORSFLASHNG. day.
Checkelectrical _-_C NOPOWER].__ REPAIRAS
CONTROL_ powerto control [ NEEDED
DISPLAY (outlet,transformer, I POWEROKI.__ [ CONTROL
BLANK. powercable,all
connections). I DEFECTIVE
Domanual
diagnostics.
CONTROLDISPLAYSHOWSI
CORRECTTIMEANDDAY -_
AND SSTEADY
I
Investigatereasonfor I
powerloss.
I
Domanual
diagnosticsto
verifyproper
I funct on.
16