Installation guide

INSTALLATION INSTRUCTIONS
Household Water Filtration System -- GXWH01C and GXWH08C
SAFETY PRECAUTIONS
Check with your state and local public works
department for plumbing and sanitation codes.
You must follow these guidelines as you install
the Household Water Filuadon System. Using
a qualified installer is recommended.
Be sure the water supply conforms with the Specifications
Guidelines,If the water supply conditions are unknown,
contact your municipal water company.
WARNING:Do not use with water that is
microbiologically unsafe or of unknown quali_'
without adequate disinfection before or after the system.
It is highly recommended that a water shut-off vane
be placed directly upstream of your household filter.
PROPER INSTALLATION
ThisHouseholdWaterFiltrationSystemmustbeproperlyinstatedandlocatedin accordancewiththeInstallationInstructionsbefore#is used.
Checkwith yourlocalpublicworksdepartmentfor
plumbingcodes.Youmustfollowthe#guides as you
install theHouseholdWaterFiltrationSystem.
UsetheHouseholdWaterFiltrationSystemona potable,
safe-to-drink,homeCOLDwatersupplyonly.Thefilter
cartridgewill notpurifywaterormake unsafewatersafe
todrink.DONOTuseonHOTwater(IOO°Fmax).
ProtecttheHouseholdWaterFiltrationSystemandpiping
fromfreezing.Waterfreezingin thesystemwill damageit.
YourHouseholdWaterFiltrationSystemwill withstandupto
125psi waterpressure.If yourhousewater supplypressure
is higherthan100psiduringtheday(itmayreachhigher
levelsat night),installa pressure-reducingvalvebeforethe
systemis installed.
Do not install on HOTWATER.The temperature of the
water supply to the Household Filtration Systenl must
be between the minimum of 40°F and the maximum
of 100°F. See the Spocification Guidolinos.
Do not install the Household _4_ter Filtration System
using copper solder fittings. The heat from the soldering
process will damage the unit.
|[/I/ARNHVG: Discard all unused parts and packaging
material after installation. Small parts remaining after
installation could be a choke hazard.
Donotinstall filter in an outside location or anysvhere
it will be exposed to sunlight.
REQUIRED TOOLS AND ACCESSORIES
FOR INSTALLATION
2 wrenches: 1½" and 1¼"
Pipe cutter or hacksaw
File
Emery paper
Optionalaccessoriesareavailable(Visa,MasterCardor Discover
cardsaccepted)byvisitingour Websiteat www.GEAppliances.com
or fromPartsandAccessories800.626.2002(U.S.)or
800.663.6060(Canada).
If unit is to be installed on plastic, PVC, or galvanized
plumbing, separate hardware must be purchased.
CONTENTS INCLUDED WITH PRODUCT
Screwdriver
For GXWH01C model, additional installation parts may
be required:
(2) :_" compression adapters with brass ferrule and
nut for installation on copper plumbing -
Installation Kit available:
- Retail Part (WHKIT)
- GE Parts (WS35X10023)
UI,-approved grounding clamps and 8-gauge copper
grounding wire-Installation Kit available:
- Retail Part (WHKIT)
- GE Parts (WS35X10023)
Teflon ®Tape
Sump Wrench
- Retail Part (UCWRNCH)
- GE Parts (X4qKSX140)
Filter housing and head
Product literature
Sediment filter (for GX_rH08C)
(2) :_A"brass compression adapters with nut
and ferrule (for GXWH08C)
Teflon ®tape (for GX_rH08C)
Sump wrench (for GX_rH08C)
Grounding clamps and wire (for GX_rH08C)
GXWH01C @ GXWH08C @
System is Testedand Certified by NSF
International against ANSI/NSF Standard
42 for nominal Particulate Reduction
Class H].
System is Tested and Certified by NSF I
International against ANSI/NSF Standard
I
42 for nominal Particulate Reduction
Class IlL
251B6021P001 1o-o1JR 49-50043-3
www.GEAppliances.com
GENERAL ELECTRIC COMPANY, Appliance Park, Louisville, KY40225
1

Summary of content (12 pages)