Product Manual

GE HEALTHCAREDRAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5450839-100, REVISION 5 DRAFT (JANUARY 17, 2013) BASIC SERVICE MANUAL
Chapter 3 - Setup Instructions 3-45
3-7-4 Printer Installation manually (cont’d)
13.)Assign a name, decide if printer should be used as default printer and confirm with NEXT
.
NOTE: If the “Printer Sharing” window appears, select ‘Do not share this printer‘ and confirm with NEXT.
14.)The “Complete the Add Printer Wizard” window appears on the screen.
15.)Complete the manual Printer Installation with the FINISH
button.
NOTE: If the message “The software you are installing for this hardware has not passed Windows ....” appears,
click CONTINUE ANYWAY
.
16.)Close all open windows, close the “System Setup” with SAVE & EXIT
and restart the system
(turn off and on the system).
Figure 3-45 Assign name
Figure 3-46 Complete manual Printer Installation
NOTICE
!! NOTICE:
After boot up of the system, verify the correct settings in the printer “Properties”,
see: Section 3-7-5 "Adjustment of Printer Settings" on page 3-46.
Afterwards assign the Printer to the remote keys P1
, P2, and/or P3/DVR see: Section
3-7-6 "Remote Control Selection" on page 3-53
.