Product Manual

GE HEALTHCARERAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5450839-100, REVISION 5 DRAFT (JANUARY 17, 2013) BASIC SERVICE MANUAL
5-68 Section 5-15 - LINUX - Voluson Maintenance System
8.) Select 3rd Boot Device and then press ENTER.
9.) Select Third Master and then press ENTER. again.
10.)Press the F10 key to Save and Exit.
11.)Confirm the “Save configuration changes and exit setup” message with OK and ENTER.
12.)Proceed with SectionSection 5-15-5-4-2 on page 5-68.
5-15-5-4-2 New Hard Disk Setup
NOTE: If not already done, change BIOS “Boot Priority Order” as described in
Section 5-15-5-4-1 on page 5-65.
1.) Wait for automatic boot into the “Voluson Maintenance System”.
Figure 5-47 3rd Boot Device