Product Manual

GE HEALTHCARERAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5450839-100, REVISION 5 DRAFT (JANUARY 17, 2013) BASIC SERVICE MANUAL
7-42 Section 7-8 - Error Messages
The System detected a problem with your harddisk.
Please do not reboot or shut down the machine!
Please contact your service department as soon as possible.
if possible,
• save “Full Backup” (see:
Section 4-5-3 on page 4-39) to
“DVD/CD”, “Network”, or “Other drive” (including images)
• if not currently done, save “Image Archive”
(see:
Section 4-5-6-1 on page 4-44),
• call technical support
There is no Printer selected! select a printer
Thickness mismatch xx - GIP xx.
Action: restart 3D (go to 2D), restart the system
restart 3D (go to 2D); restart the system
throw HRS_Exception(err_msg); restart the system
throw HRS_Exception(error.ErrorMessage()); restart the system
throw HRS_Exception(error.what()); restart the system
throw HRS_Exception(str); restart the system
Timeout, xx of xx cycles OK please call online center (OLC should contact R&D)
Tx-Power to HW : Unkown Systemtype.
Action: restart the system, If after restart not ok then call technical support
restart the system
UI_BBC_ArchiveWnd : incomplete implementation for.... restart the system
UI_BBC_ArchiveWnd::vSet() has an wrong ImageType. Action: restart the system restart the system
UI_BBC_ArchiveWnd::vSet() will change from eB_Wnd to wrong ImageType.
Action: restart the system
restart the system
UI_BBC_ArchiveWnd::vSet() will change from eBBC_Wnd to wrong ImageType.
Action: restart the system
restart the system
UI_BBC_Wnd::vSet() has an wrong ImageType.
Action: restart the system
restart the system
UI_BBC_Wnd::vSet() will change from eB_Wnd to wrong ImageType
Action: restart the system
restart the system
UI_BBC_Wnd::vSet() will change from eBBC_Wnd to wrong ImageType.
Action: restart the system
restart the system
UI_Manager: failed to create BBC Wnd. Action: restart the system restart the system
UI_Manager::vDestroyWnd: dynamic cast to UI_MMC_Wnd* failed restart the system
UI_Manager::vDestroyWnd: dynamic cast to UI_PW_Wnd* failed restart the system
UI_Manager::vHRS_Execute multiple call restart the system
Unable to complete export the TA! restart the system
Unable to complete export the TA!Unable to create new HDF5 file for TA! check free disk space
Unexpected exception occurred!! restart the system
Unhandled Probe-EEPROM data type on Attempt to read Probe-ID from an invalid
probe connector. Action: restart system
Connect another probe
Unhandled Probe-EEPROM data type on left probe connector (A). Connect another probe
Error Messages Actions