Product Manual

GE HEALTHCAREDRAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5450839-100, REVISION 5 DRAFT (JANUARY 17, 2013) BASIC SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-43
Unhandled Probe-EEPROM data type on middle probe connector (B). Connect another probe
Unhandled Probe-EEPROM data type on right probe connector (C). Connect another probe
Unhandled Probe-EEPROM data type on upper-left probe connector (CW). Connect another probe
Unit ID calculated in bGetUnitByStamp out of range restart the system
Unknown Error check VCR connections and if its switched on
Unknown Error Action: Load volume files from other storage medium. load volume files from other storage medium
Unknown system exception restart the system
unknown Xilinx-Version restart the system
unrecordable disc or disc is closed try again with another disk
Verify error (Error while checking backup data.)
Backup data are probably damaged.
Try again or load another backup.
Volume_dB Out Of Range press ok and save this user-setting once again
ViewerConMngr::vAssembleCF_DFE:attempt to get ECG_Consumer_2D- or
ECG_Draw_2D-Block from ECGViewer Objects failed!!
restart the system
ViewerConMngr::vAssembleCF_DFE:attempt to get ECG_CalcHR-Block from
ECGViewer Objects failed!!
restart the system(If after restart not ok then cal technical
support)
WMF_KoefBlock: SamplePRF too big restart the system
Write error! Action: use a new CDR, call technical support use a new CDR
Write Protected cassette! Remove cassette from VCR and put writeable cassette
into drive of VCR.
Remove cassette from VCR and put writeable cassette
into drive of VCR
Write Protected DVD! Remove DVD and put writeable DVD into drive of Recorder. Put writeable DVD into Drive
Wrong disc type! Please enter a data disc and try again. enter data disc and try again
Wrong key! restart the system
XTD - pucBackScaledBImage: Memory allocation failed restart the system
XTD - pucDSCBImage: Memory allocation failed restart the system
XTDTrackballCtrlState::No frame to trackball position found, internal failure!! restart the system
Error Messages Actions