MSDS

ManualsBrandsGE ManualsPaintSilicone II 10.1 oz. White Kitchen and Bath Caulk

MATERIAL SAFETY DATA

SHEET

Version: 1.8

12/20/2012

GE5070

SILICONE SEALANT

Page 1/8

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Manufacturer Name:

Momentive Performance Materials LLC

260 Hudson River Road

Waterford NY 12188

Revised:

12/20/2012

Prepared by

Product Regulatory Compliance

CHEMTREC

1-800-424-9300

MSDS Contact

Information

1-888-443-9466

4information@momentive.com

Chemical Family/Use:

Sealant

HMIS

Health:

Flammability:

Reactivity:

NFPA

Health:

Flammability:

Reactivity:

2. HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW

WARNING! May cause skin, eye, and stomach irritation. May cause adverse reproductive effects -

such as infertility based on animal data. Adverse reproductive effects reported in animals.

Form: Solid Form: White Odor: Ammonia.

POTENTIAL HEALTH EFFECTS

INGESTION

Not an anticipated route of exposure.

SKIN

Skin irritation is possible after contact with the uncured product. Uncured product contact will irritate lips,

gums and tongue. May be absorbed through skin and produce effects as listed under "Ingestion".

INHALATION

Applies in uncured state. May also cause other effects as listed under "Ingestion".

EYES

Eye irritation on contact with the uncured product. May cause eye irritation.

MEDICAL CONDITIONS AGGRAVATED

Pre-existing skin or respiratory diseases.

Summary of content (8 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET Version: 1.8 12/20/2012 GE5070 SILICONE SEALANT 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Manufacturer Name: Revised: Prepared by CHEMTREC MSDS Contact Information Momentive Performance Materials LLC 260 Hudson River Road Waterford NY 12188 12/20/2012 Product Regulatory Compliance 1-800-424-9300 1-888-443-9466 4information@momentive.com Chemical Family/Use: Sealant HMIS Health: 2 Flammability: 1 Reactivity: 0 NFPA Health: 2 Flammability: 1 Reactivity: 0 2.
PAGE 2
MATERIAL SAFETY DATA SHEET Version: 1.8 12/20/2012 GE5070 SILICONE SEALANT SUBCHRONIC (TARGET ORGAN ) Skin; Central nervous system. CHRONIC EFFECTS / CARCINOGENICITY This product or one of its ingredients present at 0.1% or more is NOT listed as a carcinogen or suspected carcinogen by NTP, IARC, or OSHA. ROUTES OF EXPOSURE Dermal; Eye; Oral 3. COMPOSITION/INFORMATION ON INGREDIENTS PRODUCT COMPOSITION CAS-No. WGT.
PAGE 3
MATERIAL SAFETY DATA SHEET Version: 1.8 12/20/2012 GE5070 SILICONE SEALANT INHALATION If inhaled, remove to fresh air. If not breathing give artificial respiration using a barrier device. If breathing is difficult give oxygen. Get medical attention. EYES In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. NOTE TO PHYSICIAN None known. 5. FIRE-FIGHTING MEASURES FLASH POINT: METHOD IGNITION TEMPERATURE: FLAMMABLE LIMITS LEL: FLAMMABLE LIMITS UEL: > 93.
PAGE 4
MATERIAL SAFETY DATA SHEET Version: 1.8 12/20/2012 GE5070 SILICONE SEALANT 7. HANDLING AND STORAGE PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE Avoid contact with skin and eyes. Keep out of reach of children. Keep container tightly closed. Adequate ventilation should be provided so that exposure limits are not exceeded. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION ENGINEERING CONTROLS Eye wash facilities and emergency shower must be available when handling this product.
PAGE 5
MATERIAL SAFETY DATA SHEET Version: 1.8 12/20/2012 GE5070 SILICONE SEALANT FREEZING POINT: PHYSICAL STATE: ODOR: Color: SPECIFIC GRAVITY: ACID / ALKALINITY (MEQ/G): pH: SOLUBILITY IN WATER (20 C): SOLUBILITY IN ORGANIC SOLVENT (STATE SOLVENT): VOLATILE ORGANIC CONTENT: VOC EXCL. H2O & EXEMPTS (G/L): Not applicable Solid Ammonia. White 1.02 No data available. Not applicable Insoluble PARTIAL IN TOLUENE 2.2 %(m) 27 g/l 10. STABILITY AND REACTIVITY STABILITY Stable HAZARDOUS POLYMERIZATION.
PAGE 6
MATERIAL SAFETY DATA SHEET Version: 1.8 12/20/2012 GE5070 SILICONE SEALANT MUTAGENICITY No data available. OTHER EFFECTS OF OVEREXPOSURE This product contains methylpolysiloxanes which can generate formaldehyde at approximately 300 degrees Fahrenheit (150'C) and above, in atmospheres which contain oxygen. Formaldehyde is a skin and respiratory sensitizer, eye and throat irritant, acute toxicant, and potential cancer hazard. A MSDS for formaldehyde is available from Momentive. 12.
PAGE 7
MATERIAL SAFETY DATA SHEET Version: 1.
PAGE 8
MATERIAL SAFETY DATA SHEET Version: 1.8 12/20/2012 GE5070 SILICONE SEALANT ,These data are offered in good faith as typical values and not as product specifications. No warranty, either expressed or implied, is made. The recommended industrial hygiene and safe handling procedures are believed to be generally applicable. However, each user should review these recommendations in the specific context of the intended use and determine whether they are appropriate.