Installation guide

Installation Instructions

[_ DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET

Plate position - beneath flat bottom

cabinet

/ ' ............................ "../ ' TuuchhNthe CabinetBottom

..o.._ .... jj ".. MountiiNP,ateTabs

At }east30". upto 36"

Plate position - beneath framed recessed

cabinet bottom

MountingHateTabs

Touchingthe Sack

Frame

III

30" to Cuoktop

Plate position - beneath recessed bottom

cabinet with front overhang

MountingHatewith

TabsBetowCabinet

Bottomthe Same

Distanceas the Front

OverhangDepth

I It

I II

30"to Cooktop

Yotlr cabinels Illay have decorative trim lbat iIllerl_eres

with the microwave installation. Remove the decorative

trim m install tile microwave properly and m make it

level.

THE MICROWAVE MUST BE LEVEL.

Use a level to make sure the cabinet bottom is level.

If tile cabinels have a front overhang only, wilb no

back or side frame, inslall the mourning plate down

the same distance as tile front overhang depth. This

will keep the microwave level.

_ Mea_sure the inside depth of the fi_ont overhang.

[] Draw a horizontal line on die back wall an equal

distance below the cabinet bottoIn as the inside

depth of the fi_Ollt overhang.

[] For lhis type of installation wilh front overhang only,

align lhe mounting labs with lhis horizontal line, not

touching the cabinet bottom a_ described in Step D.