Universal Remote with PC Control HO97685 User’s Manual www.jascoproducts.
FCC Caution THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Contents Introduction . . . . . . . . . . . . . . . . . . . .1 Button Descriptions . . . . . . . . . . . . . . .2 Setting up the Remote . . . . . . . . . . . .4 Setting up the Software . . . . . . . . . . .4 Setting up the Receiver . . . . . . . . . . .5 Using the PC Controls . . . . . . . . . . . . .5 Setting up for TV, DVD, VCR, Cable, or Satellite . . . . . . . . . . . . . . . . . . . . . . . . .7 Searching For Codes . . . . . . . . . . . . . .8 Identifying Codes found using the Search Procedure . . . .
Introduction Congratulations on your purchase of the GE branded HO97685 remote and receiver. This remote lets you play MP3 files DVDs and CDs in your PC. Now you don’t have to be sitting at your PC to play your MP3 files. Just a click of a button on the remote from across the room does the trick! The HO97685 remote is also a Universal Remote so you can use it to control your TV, DVD, cable box, etc. It’s easy to set up.
Button Descriptions Indicator Light The indicator light flashes when you press any button. Power Works the same as your original remote. TV, DVD, VCR, CBL/SAT, PC Used to select the device to control. PC lets you select an MP3, DVD, CD or TV tuner on your PC, when used with the wireless receiver and PC software. Setup Used for programming the remote. Last Selects the last channel viewed on your TV, VCR, or Cable Box. Volume +/Works like your original remote.
Enter Same as your original remote. A-B Toggles between TV and Video Mode. Menu Access the Menu function of the device you are controlling (if available). Exit Used to exit Menu functions. Navigation Arrows Used to navigate and adjust menu items of the device you are controlling. OK Selects menu items of the device you are controlling. PLAY, REW, FF, STOP, PAUSE, REC Work the same as on your original remote. You must press the REC button twice to begin recording.
Setting up the Remote 1.Push the tab and lift off the battery cover. 2.Fit four AAA batteries, taking care to match the + and marks in the compartment. Battery Saver Your remote automatically “times-out” if the keys are pressed for more than 30 seconds. This will save your batteries should your remote get stuck in a place where the keys remain depressed (e.g., between the sofa cushions).
3. It is recommended that you install into the default “Program Files” location and that you choose to run Boom at start-up. Restart your computer to complete set up. 4. Open Boom. If you choose to have Boom run at start-up, click on the green “Boom” icon in the system tray in the lower right corner of your screen. If you choose not to open Boom at start-up, open by selecting Boom from the programs section in your start menu. 5.
You can press Play, Stop, FF, Rew, Pause, Mute, Vol Up, Vol Down, etc., on the remote and it operates your onscreen MP3 player, PC-DVD player, PCCD player, or PC-TV Player, just as if you were clicking the buttons on your monitor screen. Note: buttons work differently depending on which application you are attempting to control with the remote. For example, in Windows® Media Player “Chan +” skips to next track and “Chan -” skips to previous track.
Setting up for TV, VCR, Cable , or Satellite 1. Turn on the device you want to control (TV, VCR, cable box, etc.). 2. Press and hold SETUP until the LED indicator lights steadily. Release the SETUP button. 3. Press and release mode button for the device you want to control (TV, DVD, VCR, Cable or Satellite). The LED blinks once. (See notes on next page). 4. Enter the 3 digit Code from the Library Code Table (separate sheet). The LED turns off after the last digit entered. 5.
Note: 1. The TV mode key can only be used to store TV codes but you can store a code for ANY device under either the DVD, VCR, or CBL/SAT mode key. E.G., you can store a Cable code under the VCR key. 2. If your TV/DVD/VCR/Cable Box does not respond, try the other codes for your brand. If it still doesn’t respond, try the Code Search method below. 3. If the LED blinked rapidly when you entered the code, you may have entered an invalid code. Recheck the code in the code list (separate sheet) and try again. 4.
The procedure on page 8 assumes that you want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure on page 7 and try ANY CBL code from the code tables, e.g. press CBL in step 3, page 8, and then enter ANY VCR code. Then follow the steps on page 8. Identifying Codes found using the Search Procedure 1. Press and hold SETUP until the LED indicator lights steadily. Release the Setup button. 2.
Troubleshooting If the remote doesn’t do anything (no red light when you press any buttons) • Check that the batteries are fitted properly (observe polarity). Replace with fresh alkaline AAA type. If you cannot control your MP3, DVD, CD player or TV tuner, on your PC (but can control other items, such as a TV, VCR, etc.). • Check that you pressed the PC button before you pressed the MP3, DVD/CD or TV button. Then press Power to launch your MP3 player, etc.
IMPORTANT NOTE-PC Code The default code for the PC button is 660. You might want to change this to use the PC button to control something else, like a Laser Disk player, for example. Note however, if you do this the PC button will not let you access the MP3, DVD and CD (1, 2, 3, buttons). To reprogram the PC button to once again access these PC functions: 1. Press and hold SETUP until the LED indicator remains on. 2. Release SETUP. 3. Press and release the PC button. 4. Enter the 3 digit code 6, 6, 0. 5.
Manual del Utilizador en Español EL CUIDADO DE FCC ESTE DISPOSITIVO SE CONFORMA CON LA PARTE 15 DE LAS REGLAS DE FCC.
La Tabla del Contenido Introducción Descripciónes del botón Arreglo el telecontrol Arreglo el software Arreglo el receptor Utilizar el Telecontrol del PC Arreglo para el TV, DVD, VCR, Cable o satelite Busquendo para códigos Los Códigos de identificación encontraron utilizar el Procedimiento de la Búsqueda Localización de averias IMPORTANTE NOTA La Garantía 13 14 15 17 18 18 18 20 21 22 23 24 24
Introducción Felicitaciones en su compra del marca GE telecontrol y receptor HO97685. Este telecontrol permite que usted juegue los archivos MP3 DVDs y CDs en su PC. Ahora usted no tiene que estar sentándose en su computadora personal para jugar sus archivos MP3. ¡Apenas un clic de un botón en el telecontrol de a través del telecontrol hace la artimaña! El telecontrol HO97685 es también un telecontrol universal tan usted lo puede utilizar para controlar su televisión, el DVD, caja de cable, etc.
Descripciones del Botónes LA LUZ DE INDICADOR Los destellos de la luz de indicador cuando usted aprieta cualquier botón. POWER (ENERGIA) Trabaja el mismo que su telecontrol original. TV DVD, VCR, CBL/SAT, PC Utilizó para escoger el dispositivo para controlar. La computadora personal permite que usted escoja un MP3, el DVD, el afinador del CD o la televisión en su computadora personal, cuando se usa con el software radiofónico de receptor y computadora personal. SETUP Utilizó para programar el telecontrol.
Escoge artículos de menú del dispositivo que usted controlan. PLAY, REW, FF, STOP, PAUSE, REC Trabaje el mismo que en su telecontrol original. Usted debe apretar el botón de REC para comenzar a registrar dos veces. También, después que usted aprieta primero computadora personal seguida por el botón 1, 2, o 3, controlan su PC, MP3, el jugador de DVD, jugador de CD, o el afinador de la televisión cuando se usa con el software radiofónico de receptor y computadora personal.
Arreglo el Telecontrol 1. Empuje la etiqueta y levante lejos la cubierta de batería. 2. Convenientes cuatro baterías de AAA, que toman quieren emparejar el + y - las marcas en el compartimiento de batería. El Salvador de la Batería Su telecontrol automáticamente "tiempo muerto" si las llaves se aprietan para más que de 30 segundos. Esto salvará sus baterías deben su telecontrol obtiene atascado en un lugar donde las llaves permanecen deprimido (por ejemplo, entre los cojines de sofá).
Arreglo el software: NOTA: El BOOM™ software permite que usted controle una aplicación de jugador MP3 del telecontrol. Trabaja con WinAmp™, RealOne™, MusicMatch®, Windows Media® Player, etc., que usted debe haber instalado previamente. Controla también un jugador de dvd, jugador de CD, o el afinador de la televisión en su computadora personal. 1. Descargue el software BOOM. Señale a su examinador de telaraña (Explorador, Netscape, etc.) a: www.jascoproducts.com/boom.html.
Para utilizar las características de Telemando de computadora personal, el Estampido debe estar corriendo. Si usted optó por no correr el Estampido en arranque cuando usted instaló el Estampido, usted necesitará abrir el Estampido del “los Programas” la sección del “Menú de Comienzo.” Entonces apriete el botón del Power. El rojo LED en los parpadeos de receptor y la aplicación (MP3, el DVD/CD, o la televisión) es lanzado. Usted puede apretar el Play, Stop, FF, Rew, Pause, Mute, Vol Up, Vol Down, etc.
Establecer para la televisión, para VCR, para el Cable, o para el Satélite 1. Prenda el dispositivo que usted quiere para controlar (la televisión, VCR, caja de cable, etc.) 2. Apriete y tenga SETUP hasta luces del indicador delantero constantemente. Libere el botón de SETUP. 3. Apriete y libere el modo el botón para el dispositivo que usted quiere controlar (la televisión, el DVD, VCR, el Cable o el Satélite). El LED parpadea una vez. (Vea notas en próxima página). 4.
Nota: 1. La llave del modo de la televisión puede sólo sea utilizado para almacenar códigos de televisión pero usted puede almacenar un código para CUALQUIER dispositivo bajo o el DVD, bajo VCR, o bajo CBL/lSAT llave de modo. Por ejemplo, usted puede almacenar un código de Cable bajo la llave de VCR. 2. Si su televisión/DVD/VCR/Caja de Cable no responde, trata los otros códigos para su marca. Si todavia el tranquilo no responde, trata el método de la Búsqueda de Código abajo. 3.
El procedimiento en páginas 21 asumen que usted quiere almacenar códigos de VCR bajo el botón de VCR, códigos de Cable bajo CBL, etc. Si usted quiere almacenar un código de VCR bajo CBL, etc., seguir primero el procedimiento en la página 20 y tratar CUALQUIER código de CBL de las tablas de código, por ejemplo prensa CBL en el paso 3, pagina 8, y entonces entrar CUALQUIER código de VCR. Entonces siga el pisa página 21. Los Códigos de identificación encontraron utilizar el Procedimiento de la Búsqueda 1.
Localización de Averias Si el telecontrol no hace nada (no luz roja cuando usted aprieta cualquiera abrocha) • Cheque que las baterías se quedan apropiadamente (observa la polaridad).Reemplace con fresco alcalino de tipo AAA. Si usted no puede controlar su MP3, el DVD, jugador de CD ni afinador de televisión, en su computadora personal (pero puede controlar otros artículos, tal como una televisión, VCR, etc.
NOTA IMPORTANTE-PC CODIGAS El código de la rebeldía para el botón de PC es 660. Usted quizás quiera cambiar esto utilizar el botón de PC para controlar algo más, como un jugador de Disco de Laser, por ejemplo. La nota sin embargo, si usted hace este el botón de PC no permitirá que usted conseguir acceso al MP3, el DVD y el CD (1, 2, 3, los botones).Para programa otra vez el botón de PC a conseguir acceso a una vez más estas funciones de PC: 1.
OTHER PRODUCTS Take advantage of the organizational capacity of your computer as well as the premium sound of yoour stereo system! Other GE branded products to expand your MP3 capabilities include: 97688 50 ft. MP3 Adapter™ Patented product designed to connect your computer to your stereo while still allowing you to connect PC speakers or PC headset to your sound card. 97686 Wireless MP3 Transmitter Transmit your music from your computer to your stereo wirelessly up to 100 ft. to any room in your house.