Installation instructions

GEI-M1011A
I. GENERAL INFORMATION
A. How to Properly Use This Instruction Manual
This manual has been written to assist the user with proper procedures when handling, installing, operating and maintaining the
equipment. All of the safety warnings and instructions in this book must be followed to prevent injury to personnel.
The installation and maintenance manual must be kept for future reference during installation, operation and maintenance.
Below is a safety symbol table that identifies the safety symbols that will appear in this manual and on the equipment.
B. Safety Symbol Legend
The use of a lightning bolt within an
arrowhead symbol, enclosed in a yellow
triangle, indicates warning of dangerous
electrical voltage that could cause an
electric shock to a person.
The use of an exclamation point within a
yellow triangle, indicates to the user that
important installation operating and
maintenance instructions must be
followed.
The use of wavy lines enclosed in a
yellow triangle, indicates that the motor
can be hot and should not be touched
without taking proper precautions.
This symbol instructs one to read the
manufacturer’s instruction manual before
installation, operation and maintenance.
This symbol identifies any terminal
which is intended for connection to an
external grounding conductor for
protection against electric shock in
case of a fault.
The use of a small case “i” enclosed in
a square indicates a general note.
WARNING:
Indicates a procedure or condition
that, if not strictly observed, could
result in personal injuries or death.
CAUTION:
Indicates a procedure or condition
that, if not strictly observed, could
result in minor injuries to personnel.
This symbol represents the need to
wear hearing protection.
3