Installation Guide

49-60698-3 9
8
PLUG IN THE ICEMAKER
Holding the icemaker in place, insert the
icemaker power cord plug into the socket on
the side wall, making sure the prongs and holes
are matched. Press
the plug firmly into the
socket. Lock the plug in
place by clipping the
restraints onto each side
of the plug. Make sure the
restraints click into place.
Make sure the power cord
is still in the hook on the
back of the icemaker.
INSTALLATION INSTRUCTIONS
Hook
Installation Instructions
ICEMAKER INSTALLATION INSTRUCTIONS (Continued)
9
MOUNT THE ICEMAKER
Ɣ/LIWWKHLFHPDNHUVRWKH fill tube assembly
(11 or 12 depending on model) fits in the fill
cup opening (D). Hang the icemaker on the
two mounting screws (B).
Make sure:
Ɣ The power cord is still firmly in the socket.
Ɣ7KHfill tube assembly (11 or 12 depending
on model) extends into the fill cup opening
at the back of the icemaker. (Check the rear
of the refrigerator to make sure the fill tube
has not been pushed out of the back of the
refrigerator).
Ɣ7KHLFHPDNHUPRXQWLQJVFUHZVDUHORFDWHGLQ
the uppermost position of the mounting slots
on the icemaker bracket.
Ɣ7KHLFHPDNHULVOHYHO
Ɣ7KHLFHPDNHUSRZHUVZLWFKLVLQWKHOFF
position.
SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREWS.
11 12
D
B
10
INSTALL THE ICE BUCKET
Place the ice bucket (8)
under the icemaker.
11
ATTACH WARRANTY LABEL
A label (7) is provided with this kit to record the
date of installation for warranty purposes. Apply it
to the back of the refrigerator.
12
KEEP THIS MANUAL
The warranty for the icemaker is printed in
this manual. Keep this manual with your
Refrigerator Owner’s Manual.
The icemaker installation inside the freezer is
now complete. Continue to the Water Valve
Assembly section on page 12.
8