Use and Care Manual
49-60698 Rev. 7 11
INSTALLATION INSTRUCTIONS
Installation Instructions
ICEMAKER INSTALLATION INSTRUCTIONS (Continued)
5
PLUG IN THE ICEMAKER
Holding the icemaker in place, insert the
icemaker power cord plug into the socket on the
side wall, making sure the prongs and holes are
matched. Press the plug firmly into the socket.
/RFNWKHSOXJLQSODFHE\FOLSSLQJWKHUHVWUDLQWV
RQWRHDFKVLGHRIWKHSOXJ0DNHVXUHWKH
restraints click into place and the power cord is
still in the hook on the back of the icemaker.
6
MOUNT THE ICEMAKER
Ɣ/LIWWKHLFHPDNHUVRWKHfill tube that was
already installed in the refrigerator fits in the fill
cup opening. Hang the icemaker on the two
mounting screws in the side wall.
Make sure:
Ɣ The power cord is still firmly in the socket.
Ɣ7KHfill tube extends into the fill cup opening
DWWKHEDFNRIWKHLFHPDNHU&KHFNWKHUHDU
of the refrigerator to make sure the fill tube
has not been pushed out of the back of the
refrigerator).
Ɣ7KHLFHPDNHUPRXQWLQJVFUHZVDUHORFDWHGLQ
the uppermost position of the mounting slots
on the icemaker bracket.
Ɣ7KHLFHPDNHULVOHYHO
Ɣ7KHLFHPDNHUSRZHUVZLWFKLVVHWWROFF.
SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREWS.
8
ATTACH WARRANTY LABEL
A labelLVSURYLGHGZLWKWKLVNLWWRUHFRUGWKH
date of installation for warranty purposes. Apply it
to the back of the refrigerator.
RE-INSTALL THE SHELF
SUPPORT, BUCKET, SHELF
AND BASKET
5HSODFHWKHFHQWHUYHUWLFDOVKHOIVXSSRUWLFH
bucket, chiller shelf and storage basket by
UHYHUVLQJWKHVWHSVLQ6WHS
9
KEEP THIS MANUAL
The warranty for the icemaker is printed in
this manual. Keep this manual with your
Refrigerator Owner’s Manual.
The icemaker installation inside the freezer is
QRZFRPSOHWH&RQWLQXHWRWKHWater Valve
Assembly section on page 14.