Use and Care Manual
49-60698 Rev. 5 13
INSTALLATION INSTRUCTIONS
3
CONNECT WATER TUBE
TO INLET (cont.)
Ɣ8VLQJRQHRIWKHadhesive-backed fasteners
VHFXUHWKHZDWHUWXEHWRWKHEDFNRIWKH
UHIULJHUDWRUDERXWEHORZWKHLQOHW
Ɣ,IWKHZDWHUWXEHLVQRWSXVKHGLQDVIDUDVLW
can go and the hose clamp is not in place over
the fill tube assembly, then leaks are possible.
Installation Instructions
WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS
(Continued)
4
INSTALL WATER LINE CLAMP
Ɣ$WWDFKWKHmetal water
line clamp (strain relief)
WRWKHUHIULJHUDWRU
Drive the screwIURP
the kit through the clamp
DWWKHVPDOOLQGHQWLQWR
the back of the cabinet.
Ɣ7KHPHWDOFODPSLVIRUWKHKRXVHZDWHUOLQH
VHHWKH:DWHU/LQH,QVWDOODWLRQ,QVWUXFWLRQV
,WLVQRWWREHXVHGIRUWKHZDWHUWXEHIURPWKH
water valve up to the inlet.
5
ROUTE AND ATTACH THE
WATER TUBE
Ɣ)DVWHQWKHSODVWLFZDWHUWXEHWRWKHEDFNRIWKH
refrigerator with adhesive-backed fasteners
VSDFLQJWKHIDVWHQHUVDVVKRZQWRWDNHXS
slack in the tube.
5
6
6PDOOLQGHQWIRUZDWHU
line clamp installation
Adhesive-backed
fasteners for water tube
6
WATER VALVE INSTALLED
5HIHUWRWKH:DWHU/LQH,QVWDOODWLRQ,QVWUXFWLRQV
for connection to the home water supply. After
water line installation is completed, set the
icemaker power switch to ON.
The icemaking cycle will not begin until the
icemaker and freezer compartment reach
operating temperature, then icemaking will
begin automatically.
REINSTALL THE COVER
5HLQVWDOOWKHFRPSUHVVRUFRPSDUWPHQWDFFHVV
FRYHU7KLVUHTXLUHVXVLQJWKHVFUHZV\RX
removed previously to reattach the cover to
the back of the refrigerator case. This must
be reinstalled for your refrigerator to function
properly.
WARNING
ELECTRIC SHOCK
HAZARD
$WWDFKWXELQJFODPSXVLQJH[LVWLQJKROHRQO\'2
127GULOOLQWRWKHUHIULJHUDWRU