Brochure

System Layout for Exemplary Setups
Unipolar operation
Bipolar Operation
Legend
(1) Mains connecting cable, standard length 10 m / 32 ft, with wire
end ferrules
(2) Control Module ISOVOLT Titan E in desktop housing
(optional 19” rack house)
(3) Connecting cable control/power stage, standard length 10 m
(max. 100 m) / 32 ft. (max. approx 320 ft.)
(4a) High Voltage Generator, 160 kV or 225 kV, Cathode,
with integrated power module TITAN E
(4b) High Voltage Generator, 160 kV or 225 kV, Anode
incl. Connecting cable
(5) High Voltage Cables, 160 kV or 225 kV, standard length
5 m / 16 ft (max. 20 m / 64 ft for 160 kV - 320 kV; max. 10 m / 32 ft
for 420 kV and 450 kV)
Input and output connections
• RS232interfaceforconnectionofmachinecontrols
• InterlockasperDIN54113.
• InterlockasperUnitedStatesRadiationControlActof1968,
§ 1020.40.
• Additionalwarningoutputthatisactiveduring
pre-warning time.
• ExternalSTART/STOP.
• ExternalEMERGENCY-STOP.
• Coolingsystem.
• Externalwarningashlamp(fail-safe).
(5)
(2)
(1)
(3)
(4a)
(7a)
(6a)
(8a)
(5)
(6b)
(5)
(5)
(2)
(3)
(7b)
(8b)
(1)
(4a)
(4b)
(6a) Unipolar Tube Housing
(see tube overview or separate product information)
(6b) Bipolar Tube Housing
(see tube overview or separate product information)
(7a)
Water hoses, standard length 10 m (max. 20 m) / 16 ft (max. 32 ft)
(7b) Cooling Oil hoses, standard length 6m (max. 20 m) / 19 ft (max.
64 ft)
(8a) Water Cooling Pump with built in flow rate monitor,
see separate specification
(8b) Oil Cooling Pump, see separate specification
• “MainsON”(230V/2A
2
).
• “HighVoltageON”(230V/2A
2
).
• Potential-freecontact,for“MainsON”(60VAC/75VDC/2A
1
).
• Potential-freecontact,for“Pre-warningTimeON”
(30V AC/36V DC / 0.5A
1
).
• Potential-freecontact,for“HighVoltageON”
(60V AC / 75V DC / 2A
1
).
1) This voltage corresponds to the max. operating voltage (rating as per VDE 0110 Group B).
2) These 230 V contacts are collectively fused with 2.5 A.
98