Quick Specs
JBS86SP/EP
GE
®
30" Free-Standing Electric Double Oven Convection Range
DIMENSIONS AND INSTALLATION INFORMATION
All GE Appliances ranges are equipped
with an Anti-Tip device. The installation
of this device is an important, required
step in the installation of the range.
Listed by
Underwriters
Laboratories
For answers to your Monogram, GE Café
™
, GE Profile
™
or GE Appliances
product questions, visit our website at geappliances.com or call
GE Answer Center
®
Service, 800.626.2000. Specification Revised 2/22
KW R ATING
240V 15.6
208V 11.7
BREAKER SIZE
40 Amps
†
RECEPTACLE LOCATIONS: Locally approved flexible
service cord or conduit must be used because terminals
are not accessible after range installation. See shaded
area in drawing for location of electrical outlet box.
Recommended outlet locations allow range to be installed
directly against wall.
NOTE: This appliance has been approved for 0" spacing
to adjacent surfaces above the cooktop. However, a 6"
minimum spacing to surfaces less than 15" above the
cooktop and adjacent cabinet is recommended to reduce
exposure to steam, grease splatter and heat.
INSTALLATION INFORMATION: Before installing,
consult installation instructions for current dimensional
data and additional requirements.
† NOTE: Check local codes for required breaker size.
30″
24″
3″
3″
7-1/2″
Use a flush mount
outlet receptacle.
Orient the receptacle
so the length is
parallel to the floor.
ACCEPTABLE ELECTRICAL
OUTLET AREA:
w/o handle
w/handle
45″
28-1/4″
25-3/4″
47″
29-7/8″
35-3/4″
to
36-1/2″
11″
30
" FREE-STANDING ELECTRIC
DOUBLE OVEN RANGE
JBS86SPSS