Manual

Cooking by Time
Time Cook I & 11 allows you to
microwave for a selected amount
of time.
Power level 10 (High) is
recommended tbr most cooking,
bul you may change this for more
flexibility. See the Cooking Guide.
To become better acquainted with
time cooking, make a cup of coffee
by following the steps below.
Using the Time Cook II
Feature
The Time Cook II feature lets you
set two time cooking functions
within one program. This is ideal if
you want to change power levels
during your cooking operations.
Here's bow to do it:
Step 1: Place food in oven in
microwave-safe container and
close the door.
The Express Cook Feature
The Express Cook feature is a
short-cut method to set time t_)r
1 to 5 minutes.
To Express Cook your fi)_xl
or beverage:
Step 1: Touch a number pad (from
I to 5) that corresponds with the
amount of your desired cooking
time (in minutes). For example,
touch the 2 pad for 2 minutes of
cooking time.
Step 2: Touch the START pad.
The oven will automatically signal.
flash "'END" and shut off at the
end of the programmed time.
Step 1: Fill a cup 2/3 lull of water,
add I teaspoon of instant coffee
and stir to dissolve. Use a cup
that has no metal decoration
and is microwave-safe (refer to
Microwaving Tips in the Safety
Instructions section). Place cup in
oven and close door.
Step 2: Touch TIME COOK I
&ll.
Step 3: Select your time. Touch 1,0
and 0 pads for one minute.
Because automatic power level 10
is recommended tbr this cup of
coffee, there is no need to change
the power level. (If power level 10
is not appropriate, see "How to
Change Power Level" at right.)
Step 4: Touch START.
Step 5: When time is up, the oven
signals and flashes "End." Oven,
light and tan shut off.
Step 6: Open the door.
Step 2: Touch TIME COOK
1 &lh
Step 3: Select your first cook time.
For example, touch 2, 1 and 5 for
two minutes and 15 seconds.
Step 4: Touch TIME COOK I & 11.
Step 5: Set your second cook time.
How to Change Power Level
After setting cooking time,
touch POWER LEVEL pad,
then touch desired number tbr
new power level.
Step 6: Touch START.
Step 7: "POWER 10" is displayed
and "COOK TIME I" counts down.
Step 8: At the end of "COOK
TIME I," the second power level
is displayed and "COOK TIME
11" is shown counting down.
Step 9: When time is up, the oven
signals and flashes "End." The
oven, light and fan shut off
Step Ill: Open the door.
Questions and Answers
Q. I set my oven tbr the time
called for in the recipe, but at the
end of the time allowed, my food
wasn't done. What happened?
A. Since house power varies due
to time or location, many time
cooking recipes give you a time
range to prevent overcooking. Set
the oven for minimum time, test
the food for doneness, and cook
your food a little longer, it'
necessary.
Q. I touched the number pads and
selected my power level. When 1
touched START, however, my
oven didn't come on. Why not?
A. The TIME COOK 1 & II pad
must be touched before setting the
number pads or else your oven will
not begin cooking.
Q. ! want to cook on a power
level other than High. What do I
need to do?
A. To change the power level,
touch the POWER LEVEL pad,
then touch desired number for new
power level.
Q. Can I interrupt Time Cook to
check the food?
A. Yes. To resume cooking, simply
close the door and press the START
pad. The timer must be reset tot
cooking to resume unless time is
remain i ng on timer.
8