6 49-2000782 Rev. 3
SELF-CLEANING OVEN SAFETY INSTRUCTIONS
The self-cleaning feature operates the oven at temperatures high enough to burn away food soils in the oven.
Follow these instructions for safe operation.
operation. Keep children away from the oven during
self-cleaning. Failure to follow these instructions
may cause burns.
shiny metal oven racks, and other utensils from the
oven. Only porcelain-coated oven racks may be left
in the oven.
and food soils from the oven. Excessive amount
of grease may ignite leading to smoke damage to
oven off and disconnect the power supply. Have it
serviced by a qualified technician.
cleaner or oven liner protective coating of any kind
should be used in or around any part of the oven.
essential for a good seal. Care should be taken not
to rub, damage or move the gasket.
Ŷ IMPORTANT: The health of some birds is
extremely sensitive to the fumes given off during
the self-cleaning cycle of any range. Move birds to
another well-ventilated room.
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
READ AND SAVE THESE INSTRUCTIONS
OVEN SAFETY INSTRUCTIONS
NEVER cover any slots,
holes, or passages in the oven bottom or
cover an entire rack with materials such as
aluminum foil or oven liners. Doing so blocks
air flow through the oven and may cause
carbon monoxide poisoning. Never place foil
or oven liners on the oven bottom. They can
trap heat causing risk of smoke or fire.
door. Hot air or steam which escapes can cause
or any type of foil or liner on the oven floor. These
items can trap heat or melt, resulting in damage to
the product and risk of shock, smoke or fire.
cool. If rack must be moved while oven is hot, be
careful to avoid touching hot surfaces.
or food in the oven when not in use. Items stored in
an oven can ignite.
vent. Items may overheat resulting in a risk of fire or
not permitted due to overheating of control knobs.
COOKTOP SAFETY INSTRUCTIONS (Cont.)
The ring may trap heat and block air to the burner
resulting in a carbon monoxide hazard.
damage the gas tubing to the surface burners
resulting in a gas leak and risk of fire.
make sure the surface controls are set to the OFF
position. This will prevent unintended gas flow from
line any part of the cooktop. Doing so may result
in carbon monoxide poisoning, overheating of the
cooktop surfaces, or a potential fire hazard.