Spec Sheet

JGSS61SP
GE
®
30" Slide-In Front Control Gas Range
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
For answers to your Monogram, GE Café
, GE Profile
,
or GE Appliances product questions, visit our website at
geappliances.com or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 12/21
NOTE: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90° walls
should be placed to avoid interference with the handle.
NOTE: Cabinets installed adjacent to slide-in
ranges must have an adhesion spec of at least 194°
temperature rating.
INSTALL ATION INFORMATION: Before installing,
consult installation instructions packed with product
for current dimensional data.
For all installations, install the required rear trim to
back of range with 4 screws provided.
36-1/4"
+/- 1/4"
29-7/8"
26-3/4"
w/o handle
29-1/4"
w/handle
47"
1-1/8"
28-1/4"
Note A: 30" Minimum to bare cabinet, see
installation instructions heights less than 30"
18"
minimum
to cabinets
above counter
6" right side
6" left side
minimum
to side wall
0"
minimum
to cabinets
below
cooktop
16"
max to
cabinets
above
counter
36"
12-1/2"
5"
2"
13"
9"
4-1/2"
4"
30"
Side Wall
supply
electrical
and
Gas
14-1/2"
30"
24"
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
30" min
See note A
JGSS61SPSS
36-1/4"
+/- 1/4"
29-7/8"
26-3/4"
w/o handle
29-1/4"
w/handle
47"
1-1/8"
28-1/4"
Note A: 30" Minimum to bare cabinet, see
installation instructions heights less than 30"
18"
minimum
to cabinets
above counter
6" right side
6" left side
minimum
to side wall
0"
minimum
to cabinets
below
cooktop
16"
max to
cabinets
above
counter
36"
12-1/2"
5"
2"
13"
9"
4-1/2"
4"
30"
Side Wall
supply
electrical
and
Gas
14-1/2"
30"
24"
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
30" min
See note A
JGSS66
All GE ranges are equipped
with an Anti-Tip device. The
installation of this device is an
important, required step in the
installation of the range.
ADA
COMPLIANT

Summary of content (2 pages)